Abstract

The ChainLadder package provides various statistical methods which are typically used for the estimation of outstanding claims reserves in general insurance, including those to estimate the claims development results as required under Solvency II.- Introduction
- The ChainLadder package
- Using the ChainLadder package
- Chain-ladder methods
- Basic idea
- Mack chain-ladder
- Munich chain-ladder
- Bootstrap chain-ladder
- Multivariate chain-ladder
- Separate chain-ladder ignoring correlations
- Multivariate chain-ladder using seemingly unrelated regressions
- Other residual covariance estimation methods
- Model with intercepts
- Joint modelling of the paid and incurred losses

- Clark’s methods
- Generalised linear model methods
- Paid-incurred chain model
- One year claims development result
- Model Validation with tweedieReserve
- Further resources
- References

```
To cite package 'ChainLadder' in publications use:
Gesmann M, Murphy D, Zhang Y, Carrato A, Wuthrich M, Concina F, Dal
Moro E (2022). _ChainLadder: Statistical Methods and Models for
Claims Reserving in General Insurance_. R package version 0.2.16,
<https://mages.github.io/ChainLadder/>.
```

The insurance industry, unlike other industries, does not sell products as such but promises. An insurance policy is a promise by the insurer to the policyholder to pay for future claims for an upfront received premium.

As a result insurers don’t know the upfront cost for their service, but rely on historical data analysis and judgement to predict a sustainable price for their offering. In General Insurance (or Non-Life Insurance, e.g. motor, property and casualty insurance) most policies run for a period of 12 months. However, the claims payment process can take years or even decades. Therefore often not even the delivery date of their product is known to insurers.

In particular losses arising from casualty insurance can take a long time to settle and even when the claims are acknowledged it may take time to establish the extent of the claims settlement cost. Claims can take years to materialize. A complex and costly example are the claims from asbestos liabilities, particularly those in connection with mesothelioma and lung damage arising from prolonged exposure to asbestos. A research report by a working party of the Institute and Faculty of Actuaries estimated that the un-discounted cost of UK mesothelioma-related claims to the UK Insurance Market for the period 2009 to 2050 could be around £10bn, see (Gravelsons et al. 2009). The cost for asbestos related claims in the US for the worldwide insurance industry was estimate to be around $120bn in 2002, see (Michaels 2002).

Thus, it should come as no surprise that the biggest item on the liability side of an insurer’s balance sheet is often the provision or reserves for future claims payments. Those reserves can be broken down in case reserves (or outstanding claims), which are losses already reported to the insurance company and losses that are incurred but not reported (IBNR) yet.

Historically, reserving was based on deterministic calculations with pen and paper, combined with expert judgement. Since the 1980’s, with the arrival of personal computer, spreadsheet software became very popular for reserving. Spreadsheets not only reduced the calculation time, but allowed actuaries to test different scenarios and the sensitivity of their forecasts.

As the computer became more powerful, ideas of more sophisticated models started to evolve. Changes in regulatory requirements, e.g. Solvency II in Europe, have fostered further research and promoted the use of stochastic and statistical techniques. In particular, for many countries extreme percentiles of reserve deterioration over a fixed time period have to be estimated for the purpose of capital setting.

Over the years several methods and models have been developed to estimate both the level and variability of reserves for insurance claims, see (Schmidt 2017) or (England and Verrall 2002) for an overview.

In practice the Mack chain-ladder and bootstrap chain-ladder models are used by many actuaries along with stress testing / scenario analysis and expert judgement to estimate ranges of reasonable outcomes, see the surveys of UK actuaries in 2002, (Lyons et al. 2002), and across the Lloyd’s market in 2012, (Orr 2012).

The ChainLadder package provides various statistical methods which are typically used for the estimation of outstanding claims reserves in general insurance. The package started out of presentations given by Markus Gesmann at the Stochastic Reserving Seminar at the Institute of Actuaries in 2007 and 2008, followed by talks at Casualty Actuarial Society (CAS) meetings joined by Dan Murphy in 2008 and Wayne Zhang in 2010.

Implementing reserving methods in R has several advantages. R provides:

- a rich language for statistical modelling and data manipulations allowing fast prototyping
- a very active user base, which publishes many extensions
- many interfaces to data bases and other applications, such as MS Excel
- an established framework for End User Computing, including documentation, testing and workflows with version control systems
- code written in plain text files, allowing effective knowledge transfer
- an effective way to collaborate over the internet
- built in functions to create reproducible research reports
- in combination with other tools such as LaTeX or RMarkdown easy to set up automated reporting facilities
- access to academic research, which is often first implemented in R

This vignette will give the reader a brief overview of the functionality of the ChainLadder package. The functions are discussed and explained in more detail in the respective help files and examples, see also (Gesmann 2014).

A set of demos is shipped with the packages and the list of demos is available via:

`demo(package="ChainLadder")`

You can install ChainLadder in the usual way from CRAN, e.g.:

`install.packages('ChainLadder')`

For more details about installing packages see (R Development Core Team 2022b).

Historical insurance data is often presented in form of a triangle structure, showing the development of claims over time for each exposure (origin) period. An origin period could be the year the policy was written or earned, or the loss occurrence period. Of course the origin period doesn’t have to be yearly, e.g. quarterly or monthly origin periods are also often used. The development period of an origin period is also called age or lag.

Data on the diagonals present payments in the same calendar period. Note, data of individual policies is usually aggregated to homogeneous lines of business, division levels or perils.

Most reserving methods of the ChainLadder package expect triangles as input data sets with development periods along the columns and the origin period in rows. The package comes with several example triangles. The following R command will list them all:

```
library(ChainLadder)
data(package="ChainLadder")
```

Let’s look at one example triangle more closely. The following triangle shows data from the Reinsurance Association of America (RAA):

` RAA`

```
dev
origin 1 2 3 4 5 6 7 8 9 10
1981 5012 8269 10907 11805 13539 16181 18009 18608 18662 18834
1982 106 4285 5396 10666 13782 15599 15496 16169 16704 NA
1983 3410 8992 13873 16141 18735 22214 22863 23466 NA NA
1984 5655 11555 15766 21266 23425 26083 27067 NA NA NA
1985 1092 9565 15836 22169 25955 26180 NA NA NA NA
1986 1513 6445 11702 12935 15852 NA NA NA NA NA
1987 557 4020 10946 12314 NA NA NA NA NA NA
1988 1351 6947 13112 NA NA NA NA NA NA NA
1989 3133 5395 NA NA NA NA NA NA NA NA
1990 2063 NA NA NA NA NA NA NA NA NA
```

This triangle shows the known values of loss from each origin year
and of annual evaluations thereafter. For example, the known values of
loss originating from the 1988 exposure period are 1351, 6947, and 13112
as of year ends 1988, 1989, and 1990, respectively. The *latest
diagonal* – i.e., the vector 18834, 16704, \(\dots\) 2063 from the upper right to the
lower left – shows the most recent evaluation available. The column
headings – 1, 2,\(\dots\), 10 – hold
the *ages* (in years) of the observations in the column relative
to the beginning of the exposure period. For example, for the 1988
origin year, the age of the 13112 value, evaluated as of 1990-12-31, is
three years.

The objective of a reserving exercise is to forecast the future claims development in the bottom right corner of the triangle and potential further developments beyond development age 10. Eventually all claims for a given origin period will be settled, but it is not always obvious to judge how many years or even decades it will take. We speak of long and short tail business depending on the time it takes to pay all claims.

The first thing you often want to do is to plot the data to get an
overview. For a data set of class `triangle`

the ChainLadder
package provides default plotting methods to give a graphical overview
of the data:

`plot(RAA/1000, main = "Claims development by origin year")`

Setting the argument `lattice=TRUE`

will produce
individual plots for each origin period.

`plot(RAA/1000, lattice=TRUE, main = "Claims development by origin year")`

You will notice from the plots that the triangle `RAA`

presents claims developments for the origin years 1981 to 1990 in a
cumulative form. For more information on the triangle plotting functions
see the help pages of `plot.triangle`

.

The ChainLadder packages comes with two helper functions,
`cum2incr`

and `incr2cum`

to transform cumulative
triangles into incremental triangles and vice versa:

```
<- cum2incr(RAA)
raa.inc ## Show first origin period and its incremental development
1,] raa.inc[
```

```
1 2 3 4 5 6 7 8 9 10
5012 3257 2638 898 1734 2642 1828 599 54 172
```

```
<- incr2cum(raa.inc)
raa.cum ## Show first origin period and its cumulative development
1,] raa.cum[
```

```
1 2 3 4 5 6 7 8 9 10
5012 8269 10907 11805 13539 16181 18009 18608 18662 18834
```

In most cases you want to analyse your own data, usually stored in data bases or spreadsheets.

There are many ways to import the data from a spreadsheet. A quick and dirty solution is using a CSV-file.

Open a new workbook and copy your triangle into cell A1, with the first column being the accident or origin period and the first row describing the development period or age.

Ensure the triangle has no formatting, such a commas to separate thousands, as those cells will be saved as characters.

Now open R and go through the following commands:

```
<- "path/to/folder/with/triangle.csv"
myCSVfile ## Use the R command:
# myCSVfile <- file.choose() to select the file interactively
<- read.csv(file=myCSVfile, header = FALSE)
tri ## Use read.csv2 if semicolons are used as a separator likely
## to be the case if you are in continental Europe
library(ChainLadder)
## Convert to triangle
<- as.triangle(as.matrix(tri))
tri # Job done.
```

Small data sets can be transferred to R backwards and forwards via the clipboard under MS Windows.

Select a data set in the spreadsheet and copy it into the clipboard, then go to R and type:

`<- read.table(file="clipboard", sep="\t", na.strings="") tri `

R makes it easy to access data using SQL statements, e.g. via an ODBC
connection^{1}, for more details see (R Development Core Team 2022a). The ChainLadder
packages includes a demo to showcase how data can be imported from a MS
Access data base, see:

`demo(DatabaseExamples)`

In this section we use data stored in a CSV-file^{2} to demonstrate some
typical operations you will want to carry out with data stored in data
bases. CSV stands for comma separated values, stored in a text file.
Note many European countries use a comma as decimal point and a
semicolon as field separator, see also the help file to
`read.csv2`

. In most cases your triangles will be stored in
tables and not in a classical triangle shape. The ChainLadder package
contains a CSV-file with sample data in a long table format. We read the
data into R’s memory with the `read.csv`

command and look at
the first couple of rows and summarise it:

```
<- file.path(system.file("Database",
filename package="ChainLadder"),
"TestData.csv")
<- read.csv(filename)
myData head(myData)
```

```
origin dev value lob
1 1977 1 153638 ABC
2 1978 1 178536 ABC
3 1979 1 210172 ABC
4 1980 1 211448 ABC
5 1981 1 219810 ABC
6 1982 1 205654 ABC
```

`summary(myData)`

```
origin dev value lob
Min. : 1 Min. : 1.00 Min. : -17657 Length:701
1st Qu.: 3 1st Qu.: 2.00 1st Qu.: 10324 Class :character
Median : 6 Median : 4.00 Median : 72468 Mode :character
Mean : 642 Mean : 4.61 Mean : 176632
3rd Qu.:1979 3rd Qu.: 7.00 3rd Qu.: 197716
Max. :1991 Max. :14.00 Max. :3258646
```

Let’s focus on one subset of the data. We select the RAA data again:

```
<- subset(myData, lob %in% "RAA")
raa head(raa)
```

```
origin dev value lob
67 1981 1 5012 RAA
68 1982 1 106 RAA
69 1983 1 3410 RAA
70 1984 1 5655 RAA
71 1985 1 1092 RAA
72 1986 1 1513 RAA
```

To transform the long table of the RAA data into a triangle we use
the function `as.triangle`

. The arguments we have to specify
are the column names of the origin and development period and further
the column which contains the values:

```
<- as.triangle(raa,
raa.tri origin="origin",
dev="dev",
value="value")
raa.tri
```

```
dev
origin 1 2 3 4 5 6 7 8 9 10
1981 5012 3257 2638 898 1734 2642 1828 599 54 172
1982 106 4179 1111 5270 3116 1817 -103 673 535 NA
1983 3410 5582 4881 2268 2594 3479 649 603 NA NA
1984 5655 5900 4211 5500 2159 2658 984 NA NA NA
1985 1092 8473 6271 6333 3786 225 NA NA NA NA
1986 1513 4932 5257 1233 2917 NA NA NA NA NA
1987 557 3463 6926 1368 NA NA NA NA NA NA
1988 1351 5596 6165 NA NA NA NA NA NA NA
1989 3133 2262 NA NA NA NA NA NA NA NA
1990 2063 NA NA NA NA NA NA NA NA NA
```

We note that the data has been stored as an incremental data set. As
mentioned above, we could now use the function `incr2cum`

to
transform the triangle into a cumulative format.

We can transform a triangle back into a data frame structure:

```
<- as.data.frame(raa.tri, na.rm=TRUE)
raa.df head(raa.df)
```

```
origin dev value
1981-1 1981 1 5012
1982-1 1982 1 106
1983-1 1983 1 3410
1984-1 1984 1 5655
1985-1 1985 1 1092
1986-1 1986 1 1513
```

This is particularly helpful when you would like to store your results back into a data base. The following figure gives you an idea of a potential data flow between R and data bases.

For small data sets or while testing procedures, it may be useful to
create triangles interactively from the command line. There are two main
ways to proceed. With the first we create a matrix of data (including
missing values in the lower right portion of the triangle) and then
convert it into a triangle with `as.triangle`

:

```
as.triangle(matrix(c(100, 150, 175, 180, 200,
110, 168, 192, 205, NA,
115, 169, 202, NA, NA,
125, 185, NA, NA, NA,
150, NA, NA, NA, NA),
nrow = 5, byrow = TRUE))
```

```
dev
origin 1 2 3 4 5
1 100 150 175 180 200
2 110 168 192 205 NA
3 115 169 202 NA NA
4 125 185 NA NA NA
5 150 NA NA NA NA
```

We may also create the triangle directly with `triangle`

by providing the rows (or columns) of *known* data as vectors,
thereby omitting the missing values:

```
triangle(c(100, 150, 175, 180, 200),
c(110, 168, 192, 205),
c(115, 169, 202),
c(125, 185),
150)
```

```
dev
origin 1 2 3 4 5
1 100 150 175 180 200
2 110 168 192 205 NA
3 115 169 202 NA NA
4 125 185 NA NA NA
5 150 NA NA NA NA
```

The classical chain-ladder is a deterministic algorithm to forecast claims based on historical data. It assumes that the proportional developments of claims from one development period to the next are the same for all origin years.

Most commonly as a first step, the age-to-age link ratios are calculated as the volume weighted average development ratios of a cumulative loss development triangle from one development period to the next \(C_{ik}, i,k =1, \dots, n\).

\[ \begin{aligned} f_{k} &= \frac{\sum_{i=1}^{n-k} C_{i,k+1}}{\sum_{i=1}^{n-k}C_{i,k}} \end{aligned} \]

```
# Calculate age-to-age factors for RAA triangle
<- 10
n <- sapply(1:(n-1),
f function(i){
sum(RAA[c(1:(n-i)),i+1])/sum(RAA[c(1:(n-i)),i])
}
) f
```

`[1] 2.999 1.624 1.271 1.172 1.113 1.042 1.033 1.017 1.009`

Often it is not suitable to assume that the oldest origin year is fully developed. A typical approach is to extrapolate the development ratios, e.g. assuming a linear model on a log scale.

```
<- 1:(n-1)
dev.period plot(log(f-1) ~ dev.period,
main="Log-linear extrapolation of age-to-age factors")
<- lm(log(f-1) ~ dev.period)
tail.model abline(tail.model)
```

```
<- coef(tail.model)
co ## extrapolate another 100 dev. period
<- exp(co[1] + c(n:(n + 100)) * co[2]) + 1
tail <- prod(tail)
f.tail f.tail
```

`[1] 1.009`

The age-to-age factors allow us to plot the expected claims development patterns.

```
plot(100*(rev(1/cumprod(rev(c(f, tail[tail>1.0001]))))), t="b",
main="Expected claims development pattern",
xlab="Dev. period", ylab="Development % of ultimate loss")
```

The link ratios are then applied to the latest known cumulative
claims amount to forecast the next development period. The
*squaring* of the RAA triangle is calculated below, where an
*ultimate* column is appended to the right to accommodate the
expected development beyond the oldest age (10) of the triangle due to
the tail factor (1.009) being greater than unity.

```
<- c(f, f.tail)
f <- cbind(RAA, Ult = rep(0, 10))
fullRAA for(k in 1:n){
-k+1):n, k+1] <- fullRAA[(n-k+1):n,k]*f[k]
fullRAA[(n
}round(fullRAA)
```

```
1 2 3 4 5 6 7 8 9 10 Ult
1981 5012 8269 10907 11805 13539 16181 18009 18608 18662 18834 19012
1982 106 4285 5396 10666 13782 15599 15496 16169 16704 16858 17017
1983 3410 8992 13873 16141 18735 22214 22863 23466 23863 24083 24311
1984 5655 11555 15766 21266 23425 26083 27067 27967 28441 28703 28974
1985 1092 9565 15836 22169 25955 26180 27278 28185 28663 28927 29200
1986 1513 6445 11702 12935 15852 17649 18389 19001 19323 19501 19685
1987 557 4020 10946 12314 14428 16064 16738 17294 17587 17749 17917
1988 1351 6947 13112 16664 19525 21738 22650 23403 23800 24019 24246
1989 3133 5395 8759 11132 13043 14521 15130 15634 15898 16045 16196
1990 2063 6188 10046 12767 14959 16655 17353 17931 18234 18402 18576
```

The total estimated outstanding loss under this method is about 54100:

`sum(fullRAA[ ,11] - getLatestCumulative(RAA))`

`[1] 54146`

This approach is also called Loss Development Factor (LDF) method.

More generally, the factors used to square the triangle need not
always be drawn from the dollar weighted averages of the triangle. Other
sources of factors from which the actuary may *select* link
ratios include simple averages from the triangle, averages weighted
toward more recent observations or adjusted for outliers, and benchmark
patterns based on related, more credible loss experience. Also, since
the ultimate value of claims is simply the product of the most current
diagonal and the cumulative product of the link ratios, the completion
of interior of the triangle is usually not displayed in favor of that
multiplicative calculation.

For example, suppose the actuary decides that the volume weighted factors from the RAA triangle are representative of expected future growth, but discards the 1.009 tail factor derived from the loglinear fit in favor of a five percent tail (1.05) based on loss data from a larger book of similar business. The LDF method might be displayed in R as follows.

```
<- c(attr(ata(RAA), "vwtd"), tail = 1.05)
linkratios round(linkratios, 3) # display to only three decimal places
```

```
1-2 2-3 3-4 4-5 5-6 6-7 7-8 8-9 9-10 tail
2.999 1.624 1.271 1.172 1.113 1.042 1.033 1.017 1.009 1.050
```

```
<- rev(cumprod(rev(linkratios)))
LDF names(LDF) <- colnames(RAA) # so the display matches the triangle
round(LDF, 3)
```

```
1 2 3 4 5 6 7 8 9 10
9.366 3.123 1.923 1.513 1.292 1.160 1.113 1.078 1.060 1.050
```

```
<- getLatestCumulative(RAA)
currentEval # Reverse the LDFs so the first, least mature factor [1]
# is applied to the last origin year (1990)
<- currentEval * rev(LDF) #
EstdUlt # Start with the body of the exhibit
<- data.frame(currentEval, LDF = round(rev(LDF), 3), EstdUlt)
Exhibit # Tack on a Total row
<- rbind(Exhibit,
Exhibit data.frame(currentEval=sum(currentEval), LDF=NA, EstdUlt=sum(EstdUlt),
row.names = "Total"))
Exhibit
```

```
currentEval LDF EstdUlt
1981 18834 1.050 19776
1982 16704 1.060 17701
1983 23466 1.078 25288
1984 27067 1.113 30138
1985 26180 1.160 30373
1986 15852 1.292 20476
1987 12314 1.513 18637
1988 13112 1.923 25220
1989 5395 3.123 16847
1990 2063 9.366 19323
Total 160987 NA 223778
```

Since the early 1990s several papers have been published to embed the simple chain-ladder method into a statistical framework. Ben Zehnwirth and Glenn Barnett point out in (Zehnwirth and Barnett 2000) that the age-to-age link ratios can be regarded as the coefficients of a weighted linear regression through the origin, see also (Murphy 1994).

```
<- function(i, Triangle){
lmCL lm(y~x+0, weights=1/Triangle[,i],
data=data.frame(x=Triangle[,i], y=Triangle[,i+1]))
}sapply(lapply(c(1:(n-1)), lmCL, RAA), coef)
```

```
x x x x x x x x x
2.999 1.624 1.271 1.172 1.113 1.042 1.033 1.017 1.009
```

Thomas Mack published in 1993 (Mack 1993) a method which estimates the standard errors of the chain-ladder forecast without assuming a distribution under three conditions.

Following the notation of Mack (Mack 1999) let \(C_{ik}\) denote the cumulative loss amounts of origin period (e.g. accident year) \(i=1,\ldots,m\), with losses known for development period (e.g. development year) \(k \le n+1-i\).

In order to forecast the amounts \(C_{ik}\) for \(k > n+1-i\) the Mack chain-ladder-model assumes:

\[ \begin{aligned} \mbox{CL1: } & E[ F_{ik}| C_{i1},C_{i2},\ldots,C_{ik} ] = f_k \mbox{ with } F_{ik}=\frac{C_{i,k+1}}{C_{ik}}\\ \mbox{CL2: } & Var( \frac{C_{i,k+1}}{C_{ik}} | C_{i1},C_{i2}, \ldots,C_{ik} ) = \frac{\sigma_k^2}{w_{ik} C^\alpha_{ik}}\\ \mbox{CL3: } & \{C_{i1},\ldots,C_{in}\}, \{ C_{j1},\ldots,C_{jn}\},\mbox{ are independent for origin period } i \neq j \end{aligned} \]

with \(w_{ik} \in [0;1], \alpha \in \{0,1,2\}\). If these assumptions hold, the Mack chain-ladder-model gives an unbiased estimator for IBNR (Incurred But Not Reported) claims.

The Mack chain-ladder model can be regarded as a weighted linear
regression through the origin for each development period: ```
lm(y ~
x + 0, weights=w/x^(2-alpha))
```

, where \(y\) is the vector of claims at development
period \(k+1\) and \(x\) is the vector of claims at development
period \(k\).

The Mack method is implemented in the ChainLadder package via the
function `MackChainLadder`

.

As an example we apply the `MackChainLadder`

function to
our triangle `RAA`

:

```
<- MackChainLadder(RAA, est.sigma="Mack")
mack # same as summary(mack) mack
```

```
MackChainLadder(Triangle = RAA, est.sigma = "Mack")
Latest Dev.To.Date Ultimate IBNR Mack.S.E CV(IBNR)
1981 18,834 1.000 18,834 0 0 NaN
1982 16,704 0.991 16,858 154 206 1.339
1983 23,466 0.974 24,083 617 623 1.010
1984 27,067 0.943 28,703 1,636 747 0.457
1985 26,180 0.905 28,927 2,747 1,469 0.535
1986 15,852 0.813 19,501 3,649 2,002 0.549
1987 12,314 0.694 17,749 5,435 2,209 0.406
1988 13,112 0.546 24,019 10,907 5,358 0.491
1989 5,395 0.336 16,045 10,650 6,333 0.595
1990 2,063 0.112 18,402 16,339 24,566 1.503
Totals
Latest: 160,987.00
Dev: 0.76
Ultimate: 213,122.23
IBNR: 52,135.23
Mack.S.E 26,909.01
CV(IBNR): 0.52
```

We can access the loss development factors and the full triangle via:

`$f mack`

` [1] 2.999 1.624 1.271 1.172 1.113 1.042 1.033 1.017 1.009 1.000`

`$FullTriangle mack`

```
dev
origin 1 2 3 4 5 6 7 8 9 10
1981 5012 8269 10907 11805 13539 16181 18009 18608 18662 18834
1982 106 4285 5396 10666 13782 15599 15496 16169 16704 16858
1983 3410 8992 13873 16141 18735 22214 22863 23466 23863 24083
1984 5655 11555 15766 21266 23425 26083 27067 27967 28441 28703
1985 1092 9565 15836 22169 25955 26180 27278 28185 28663 28927
1986 1513 6445 11702 12935 15852 17649 18389 19001 19323 19501
1987 557 4020 10946 12314 14428 16064 16738 17294 17587 17749
1988 1351 6947 13112 16664 19525 21738 22650 23403 23800 24019
1989 3133 5395 8759 11132 13043 14521 15130 15634 15898 16045
1990 2063 6188 10046 12767 14959 16655 17353 17931 18234 18402
```

If you are only interested in the summary statistics then use:

```
<- summary(mack) # See also ?summary.MackChainLadder
mack_smmry $ByOrigin mack_smmry
```

```
Latest Dev.To.Date Ultimate IBNR Mack.S.E CV(IBNR)
1981 18834 1.0000 18834 0.0 0.0 NaN
1982 16704 0.9909 16858 154.0 206.2 1.3395
1983 23466 0.9744 24083 617.4 623.4 1.0097
1984 27067 0.9430 28703 1636.1 747.2 0.4567
1985 26180 0.9050 28927 2746.7 1469.5 0.5350
1986 15852 0.8129 19501 3649.1 2001.9 0.5486
1987 12314 0.6938 17749 5435.3 2209.2 0.4065
1988 13112 0.5459 24019 10907.2 5357.9 0.4912
1989 5395 0.3362 16045 10650.0 6333.2 0.5947
1990 2063 0.1121 18402 16339.4 24566.3 1.5035
```

`$Totals mack_smmry`

```
Totals
Latest: 1.610e+05
Dev: 7.554e-01
Ultimate: 2.131e+05
IBNR: 5.214e+04
Mack S.E.: 2.691e+04
CV(IBNR): 5.161e-01
```

To check that Mack’s assumption are valid review the residual plots, you should see no trends in either of them.

`plot(mack)`

We can plot the development, including the forecast and estimated
standard errors by origin period by setting the argument
`lattice=TRUE`

.

`plot(mack, lattice=TRUE)`

The `weights`

argument allows for the selection of a
subset of the triangle for the projections.

For example, in order to use only the last 5 calendar years of the
triangle, set the `weights`

as follows:

```
<- (row(RAA) + col(RAA) - 1)
calPeriods <- ifelse(calPeriods <= 5, 0, ifelse(calPeriods > 10, NA, 1))) (weights
```

```
[,1] [,2] [,3] [,4] [,5] [,6] [,7] [,8] [,9] [,10]
[1,] 0 0 0 0 0 1 1 1 1 1
[2,] 0 0 0 0 1 1 1 1 1 NA
[3,] 0 0 0 1 1 1 1 1 NA NA
[4,] 0 0 1 1 1 1 1 NA NA NA
[5,] 0 1 1 1 1 1 NA NA NA NA
[6,] 1 1 1 1 1 NA NA NA NA NA
[7,] 1 1 1 1 NA NA NA NA NA NA
[8,] 1 1 1 NA NA NA NA NA NA NA
[9,] 1 1 NA NA NA NA NA NA NA NA
[10,] 1 NA NA NA NA NA NA NA NA NA
```

`MackChainLadder(RAA, weights=weights, est.sigma = "Mack")`

```
MackChainLadder(Triangle = RAA, weights = weights, est.sigma = "Mack")
Latest Dev.To.Date Ultimate IBNR Mack.S.E CV(IBNR)
1981 18,834 1.0000 18,834 0 0 NaN
1982 16,704 0.9909 16,858 154 206 1.339
1983 23,466 0.9744 24,083 617 623 1.010
1984 27,067 0.9430 28,703 1,636 747 0.457
1985 26,180 0.9050 28,927 2,747 1,469 0.535
1986 15,852 0.8229 19,264 3,412 2,039 0.598
1987 12,314 0.7106 17,329 5,015 2,144 0.428
1988 13,112 0.5613 23,361 10,249 4,043 0.395
1989 5,395 0.2935 18,384 12,989 5,931 0.457
1990 2,063 0.0843 24,463 22,400 16,779 0.749
Totals
Latest: 160,987.00
Dev: 0.73
Ultimate: 220,207.63
IBNR: 59,220.63
Mack.S.E 19,859.00
CV(IBNR): 0.34
```

Munich chain-ladder is a reserving method that reduces the gap between IBNR projections based on paid losses and IBNR projections based on incurred losses. The Munich chain-ladder method uses correlations between paid and incurred losses of the historical data into the projection for the future (Quarg and Mack 2004).

` MCLpaid`

```
dev
origin 1 2 3 4 5 6 7
1 576 1804 1970 2024 2074 2102 2131
2 866 1948 2162 2232 2284 2348 NA
3 1412 3758 4252 4416 4494 NA NA
4 2286 5292 5724 5850 NA NA NA
5 1868 3778 4648 NA NA NA NA
6 1442 4010 NA NA NA NA NA
7 2044 NA NA NA NA NA NA
```

` MCLincurred`

```
dev
origin 1 2 3 4 5 6 7
1 978 2104 2134 2144 2174 2182 2174
2 1844 2552 2466 2480 2508 2454 NA
3 2904 4354 4698 4600 4644 NA NA
4 3502 5958 6070 6142 NA NA NA
5 2812 4882 4852 NA NA NA NA
6 2642 4406 NA NA NA NA NA
7 5022 NA NA NA NA NA NA
```

```
par(mfrow=c(1,2))
plot(MCLpaid)
plot(MCLincurred)
```

`par(mfrow=c(1,1))`

```
# Following the example in Quarg's (2004) paper:
<- MunichChainLadder(MCLpaid, MCLincurred, est.sigmaP=0.1, est.sigmaI=0.1)
MCL MCL
```

```
MunichChainLadder(Paid = MCLpaid, Incurred = MCLincurred, est.sigmaP = 0.1,
est.sigmaI = 0.1)
Latest Paid Latest Incurred Latest P/I Ratio Ult. Paid Ult. Incurred
1 2,131 2,174 0.980 2,131 2,174
2 2,348 2,454 0.957 2,383 2,444
3 4,494 4,644 0.968 4,597 4,629
4 5,850 6,142 0.952 6,119 6,176
5 4,648 4,852 0.958 4,937 4,950
6 4,010 4,406 0.910 4,656 4,665
7 2,044 5,022 0.407 7,549 7,650
Ult. P/I Ratio
1 0.980
2 0.975
3 0.993
4 0.991
5 0.997
6 0.998
7 0.987
Totals
Paid Incurred P/I Ratio
Latest: 25,525 29,694 0.86
Ultimate: 32,371 32,688 0.99
```

You can use `summary(MCL)$ByOrigin`

and
`summary(MCL)$Totals`

to extract the information from the
output above.

`plot(MCL)`

The `BootChainLadder`

function uses a two-stage
bootstrapping/simulation approach following the paper by England and
Verrall (England and Verrall 2002). In the
first stage an ordinary chain-ladder methods is applied to the
cumulative claims triangle. From this we calculate the scaled Pearson
residuals which we bootstrap R times to forecast future incremental
claims payments via the standard chain-ladder method. In the second
stage we simulate the process error with the bootstrap value as the mean
and using the process distribution assumed. The set of reserves obtained
in this way forms the predictive distribution, from which summary
statistics such as mean, prediction error or quantiles can be
derived.

```
## See also the example in section 8 of England & Verrall (2002)
## on page 55.
<- BootChainLadder(RAA, R=999, process.distr="gamma")
B B
```

```
BootChainLadder(Triangle = RAA, R = 999, process.distr = "gamma")
Latest Mean Ultimate Mean IBNR IBNR.S.E IBNR 75% IBNR 95%
1981 18,834 18,834 0 0 0 0
1982 16,704 16,883 179 750 206 1,530
1983 23,466 24,146 680 1,310 1,147 3,248
1984 27,067 28,652 1,585 1,938 2,387 5,340
1985 26,180 28,975 2,795 2,283 4,057 7,164
1986 15,852 19,592 3,740 2,650 5,182 8,544
1987 12,314 17,784 5,470 3,170 7,037 11,405
1988 13,112 23,896 10,784 4,847 13,755 19,334
1989 5,395 16,541 11,146 6,218 15,022 23,088
1990 2,063 20,253 18,190 14,468 25,612 45,225
Totals
Latest: 160,987
Mean Ultimate: 215,558
Mean IBNR: 54,571
IBNR.S.E 19,646
Total IBNR 75%: 66,982
Total IBNR 95%: 91,044
```

You can use `summary(B)$ByOrigin`

and
`summary(B)$Totals`

to extract the information from the
output above.

`plot(B)`

Quantiles of the bootstrap IBNR can be calculated via the
`quantile`

function:

`quantile(B, c(0.75,0.95,0.99, 0.995))`

```
$ByOrigin
IBNR 75% IBNR 95% IBNR 99% IBNR 99.5%
1981 0.0 0 0 0
1982 205.6 1530 3334 3750
1983 1146.7 3248 5071 5350
1984 2387.2 5340 7530 9348
1985 4057.4 7164 10239 10716
1986 5182.3 8544 12747 13831
1987 7037.3 11405 15020 16979
1988 13755.0 19334 24430 26913
1989 15021.7 23088 28121 29216
1990 25612.4 45225 63660 70960
$Totals
Totals
IBNR 75%: 66982
IBNR 95%: 91044
IBNR 99%: 113873
IBNR 99.5%: 120438
```

The distribution of the IBNR appears to follow a log-normal distribution, so let’s fit it:

```
## fit a distribution to the IBNR
library(MASS)
plot(ecdf(B$IBNR.Totals))
## fit a log-normal distribution
<- fitdistr(B$IBNR.Totals[B$IBNR.Totals>0], "lognormal")
fit fit
```

```
meanlog sdlog
10.842616 0.366144
( 0.011584) ( 0.008191)
```

```
curve(plnorm(x,fit$estimate["meanlog"], fit$estimate["sdlog"]),
col="red", add=TRUE)
```

The Mack chain-ladder technique can be generalized to the multivariate setting where multiple reserving triangles are modelled and developed simultaneously. The advantage of the multivariate modelling is that correlations among different triangles can be modelled, which will lead to more accurate uncertainty assessments. Reserving methods that explicitly model the between-triangle contemporaneous correlations can be found in (Pröhl and Schmidt 2005), (Michael Merz and Wüthrich 2008b). Another benefit of multivariate loss reserving is that structural relationships between triangles can also be reflected, where the development of one triangle depends on past losses from other triangles. For example, there is generally need for the joint development of the paid and incurred losses (Quarg and Mack 2004). Most of the chain-ladder-based multivariate reserving models can be summarised as sequential seemingly unrelated regressions (Zhang 2010). We note another strand of multivariate loss reserving builds a hierarchical structure into the model to allow estimation of one triangle to “borrow strength” from other triangles, reflecting the core insight of actuarial credibility (Zhang, Dukic, and Guszcza 2012).

Denote \(Y_{i,k}=(Y^{(1)}_{i,k}, \cdots ,Y^{(N)}_{i,k})\) as an \(N \times 1\) vector of cumulative losses at accident year \(i\) and development year \(k\) where \((n)\) refers to the n-th triangle. (Zhang 2010) specifies the model in development period \(k\) as:

\[ \begin{equation} Y_{i,k+1} = A_k + B_k \cdot Y_{i,k} + \epsilon_{i,k}, \end{equation} \]

where \(A_k\) is a column of intercepts and \(B_k\) is the development matrix for development period \(k\). Assumptions for this model are:

\[ \begin{aligned} &E(\epsilon_{i,k}|Y_{i,1}, \cdots,Y_{i,I+1-k}) =0, \\ &cov(\epsilon_{i,k}|Y_{i,1}, \cdots, Y_{i,I+1-k})=D(Y_{i,k}^{-\delta/2}) \, \Sigma_k \, D(Y_{i,k}^{-\delta/2}), \\ &\text{losses of different accident years are independent}, \\ &\epsilon_{i,k} \text{ are symmetrically distributed}. \end{aligned} \]

In the above, \(D\) is the diagonal operator, and \(\delta\) is a known positive value that controls how the variance depends on the mean (as weights). This model is referred to as the general multivariate chain ladder [GMCL] in (Zhang 2010). A important special case where \(A_k=0\) and \(B_k\)’s are diagonal is a naive generalization of the chain-ladder, often referred to as the multivariate chain-ladder [MCL] (Pröhl and Schmidt 2005).

In the following, we first introduce the class
`triangles`

, for which we have defined several utility
functions. Indeed, any input triangles to the
`MultiChainLadder`

function will be converted to
`triangles`

internally. We then present loss reserving
methods based on the MCL and GMCL models in turn.

Consider the two liability loss triangles from (Michael Merz and Wüthrich 2008b). It comes as a list of two matrices:

`str(liab)`

```
List of 2
$ GeneralLiab: num [1:14, 1:14] 59966 49685 51914 84937 98921 ...
$ AutoLiab : num [1:14, 1:14] 114423 152296 144325 145904 170333 ...
```

We can convert a list to a `triangles`

object using

```
<- as(liab, "triangles")
liab2 class(liab2)
```

```
[1] "triangles"
attr(,"package")
[1] "ChainLadder"
```

We can find out what methods are available for this class:

`showMethods(classes = "triangles")`

For example, if we want to extract the last three columns of each
triangle, we can use the `[`

operator as follows:

```
# use drop = TRUE to remove rows that are all NA's
12:14, drop = TRUE] liab2[,
```

```
An object of class "triangles"
[[1]]
[,1] [,2] [,3]
[1,] 540873 547696 549589
[2,] 563571 562795 NA
[3,] 602710 NA NA
[[2]]
[,1] [,2] [,3]
[1,] 391328 391537 391428
[2,] 485138 483974 NA
[3,] 540742 NA NA
```

The following combines two columns of the triangles to form a new matrix:

`cbind2(liab2[1:3, 12])`

```
[,1] [,2]
[1,] 540873 391328
[2,] 563571 485138
[3,] 602710 540742
```

The form of regression models used in estimating the development
parameters is controlled by the `fit.method`

argument. If we
specify `fit.method = "OLS"`

, the ordinary least squares will
be used and the estimation of development factors for each triangle is
independent of the others. In this case, the residual covariance matrix
\(\Sigma_k\) is diagonal. As a result,
the multivariate model is equivalent to running multiple Mack
chain-ladders separately.

```
<- MultiChainLadder(liab, fit.method = "OLS")
fit1 lapply(summary(fit1)$report.summary, "[", 15, )
```

```
$`Summary Statistics for Triangle 1`
Latest Dev.To.Date Ultimate IBNR S.E CV
Total 11343397 0.6482 17498658 6155261 427289 0.0694
$`Summary Statistics for Triangle 2`
Latest Dev.To.Date Ultimate IBNR S.E CV
Total 8759806 0.8093 10823418 2063612 162872 0.0789
$`Summary Statistics for Triangle 1+2`
Latest Dev.To.Date Ultimate IBNR S.E CV
Total 20103203 0.7098 28322077 8218874 457278 0.0556
```

In the above, we only show the total reserve estimate for each
triangle to reduce the output. The full summary including the estimate
for each year can be retrieved using the usual `summary`

function. By default, the `summary`

function produces reserve
statistics for all individual triangles, as well as for the portfolio
that is assumed to be the sum of the two triangles. This behaviour can
be changed by supplying the `portfolio`

argument. See the
documentation for details.

We can verify if this is indeed the same as the univariate Mack chain
ladder. For example, we can apply the `MackChainLadder`

function to each triangle:

```
<- lapply(liab, MackChainLadder, est.sigma = "Mack")
fit # the same as the first triangle above
lapply(fit, function(x) t(summary(x)$Totals))
```

```
$GeneralLiab
Latest: Dev: Ultimate: IBNR: Mack S.E.: CV(IBNR):
Totals 11343397 0.6482 17498658 6155261 427289 0.06942
$AutoLiab
Latest: Dev: Ultimate: IBNR: Mack S.E.: CV(IBNR):
Totals 8759806 0.8093 10823418 2063612 162872 0.07893
```

The argument `mse.method`

controls how the mean square
errors are computed. By default, it implements the Mack method. An
alternative method is the conditional re-sampling approach in (Buchwalder et al. 2006), which assumes the
estimated parameters are independent. This is used when ```
mse.method
= "Independence"
```

. For example, the following reproduces the
result in (Buchwalder et al. 2006). Note
that the first argument must be a list, even though only one triangle is
used.

```
<- MultiChainLadder(list(GenIns), fit.method = "OLS",
(B1 mse.method = "Independence"))
```

```
$`Summary Statistics for Input Triangle`
Latest Dev.To.Date Ultimate IBNR S.E CV
1 3,901,463 1.0000 3,901,463 0 0 0.000
2 5,339,085 0.9826 5,433,719 94,634 75,535 0.798
3 4,909,315 0.9127 5,378,826 469,511 121,700 0.259
4 4,588,268 0.8661 5,297,906 709,638 133,551 0.188
5 3,873,311 0.7973 4,858,200 984,889 261,412 0.265
6 3,691,712 0.7223 5,111,171 1,419,459 411,028 0.290
7 3,483,130 0.6153 5,660,771 2,177,641 558,356 0.256
8 2,864,498 0.4222 6,784,799 3,920,301 875,430 0.223
9 1,363,294 0.2416 5,642,266 4,278,972 971,385 0.227
10 344,014 0.0692 4,969,825 4,625,811 1,363,385 0.295
Total 34,358,090 0.6478 53,038,946 18,680,856 2,447,618 0.131
```