**MEDseq** is an R package which fits a range of models introduced by Murphy et al. (2019). These are finite mixtures of exponential-distance models for clustering longitudinal/categorical life-course sequence data. A family of parsimonious precision parameter constraints are accommodated. So too are sampling weights. Gating covariates can be supplied via formula interfaces. Visualisation of the results of such models is also facilitated.

The most important function in the **MEDseq** package is: `MEDseq_fit`

, for fitting the models via the EM or CEM algorithms. `MEDseq_control`

allows supplying additional arguments which govern, among other things, controls on the initialisation of the allocations for the EM/CEM algorithm and the various model selection options. `MEDseq_compare`

is provided for conducting model selection between different results from using different covariate combinations &/or initialisation strategies, etc. `MEDseq_stderr`

is provided for computing the standard errors of the coefficients for the covariates in the gating network.

A dedicated plotting function exists for visualising various aspects of the results, using new methods as well as some existing methods from the **TraMineR** package. Finally, the package also contains two data sets: `biofam`

and `mvad`

.

If you find bugs or want to suggest new features please visit the **MEDseq** GitHub issues page.

This vignette mostly aims to demonstrate the **MEDseq** models by reproducing the analysis of the MVAD data in the Murphy et al. (2019) paper. However, an additional example data set is also analysed.

**MEDseq** will run in Windows, Mac OS X or Linux. To install it you first need to install R. Installing Rstudio as a nice desktop environment for using R is also recommended.

Once in R you can type at the R command prompt:

```
install.packages('devtools')
devtools::install_github('Keefe-Murphy/MEDseq')
```

to install the latest development version of the package from the **MEDseq** GitHub page.

To instead install the latest stable official release of the package from CRAN go to R and type:

`install.packages('MEDseq')`

In either case, if you then type:

`library(MEDseq)`

it will load in all the **MEDseq** functions.

The GitHub version contains a few more features but some of these may not yet be fully tested, and occasionally this version might be liable to break when it is in the process of being updated.

Load the MVAD data. The data comes from a study by McVicar and Anyadike-Danes (2002) on transition from school to work. The data consist of static background characteristics (covariates and sampling weights) and a time series sequence of 72 monthly labour market activities for each of 712 individuals in a cohort survey. The individuals were followed up from July 1993 to June 1999. Type `?mvad`

for more information. We will drop the first sequence position (i.e. time point) as it (along with the covariates `Grammar`

and `Location`

) were used to define the sampling weights.

Note that the data set must have equal sequence lengths, and the intervals are assumed to be evenly spaced. The MVAD data meets these criteria. The **TraMineR** function `seqdef`

is used to convert the data to the appropriate format.

```
data(mvad, package="MEDseq")
mvad$Location <- factor(apply(mvad[,5L:9L], 1L, function(x) which(x == "yes")),
labels = colnames(mvad[,5L:9L]))
mvad <- list(covariates = mvad[c(3L:4L,10L:14L,87L)],
sequences = mvad[,15L:86L],
weights = mvad[,2L])
mvad.cov <- mvad$covariates
mvad.seq <- seqdef(mvad$sequences[,-1L],
states = c("EM", "FE", "HE", "JL", "SC", "TR"),
labels = c("Employment", "Further Education", "Higher Education",
"Joblessness", "School", "Training"))
```

The function `MEDseq_control`

allows the algorithm used for model fitting, the method used to initialise the allocations (e.g. k-medoids or Ward’s hierarchical clustering), the criterion used to identify the optimal model (e.g. density-based silhouette (DBS), average silhouette width (ASW), BIC, etc.), and more to be specified. By default, the EM algorithm is employed, k-medoids is used to obtain starting values, and the (weighted) mean density-based silhouette criterion is used to choose the optimal model (if a range of models are fitted). In this vignette, we will mostly accept these defaults.

The optimal model identified in the Murphy et al. (2019) paper has `G=10`

components, the `UCN`

model type, sampling weights, and a subset of covariates identified using a stepwise variable selection procedure. The UCN model has a single precision parameter for each cluster. The `gating`

covariates can be specified via a formula interface. The argument `covars`

tells the formula where to look for the specified covariates. Thus, to fit such a model:

```
mod1 <- MEDseq_fit(mvad.seq, G=10, modtype="UCN", weights=mvad$weights,
gating=~ fmpr + gcse5eq + livboth, covars=mvad.cov)
```

The names of the model types are CC, UC, CU, UU, CCN, UCN, CUN, and UUN. The first letter denotes whether the precision parameters are constrained (C) or unconstrained (U) across clusters, the second denotes the same across time periods, and the third letter (N) indicates the precision of a noise component. In this context, a noise component is one wherein the distribution of the sequences is uniform.

Typically, a range of `G`

values and `modtype`

settings are supplied to a single call to `MEDseq_fit`

and chosen from using some criterion. Thus, for a given set of covariates, the model which is optimum in terms of the number of components and the precision parameter configuration can be identified.

To compare different runs using different sets of covariates, the function `MEDseq_compare`

can be used. First, let’s fit models with all covariates included (except `Grammar`

and `Location`

) and no covariates included. Let’s try different numbers of components and different model types. Note that only the first model here includes a noise component.

```
# 9-component CUN model with no covariates.
# The CUN model has a precision parameter for each sequence position (i.e. time point),
# though each time point's precision is common across clusters.
mod2 <- MEDseq_fit(mvad.seq, G=9, modtype="CUN", weights=mvad$weights, verbose=FALSE)
# 11-component CC model with all coviarates.
# The CC model has only a single precision parameter across all clusters and time points.
mod3 <- MEDseq_fit(mvad.seq, G=11, modtype="CC", weights=mvad$weights,
gating=~. - Grammar - Location, covars=mvad.cov, verbose=FALSE)
```

Confirm that the first model is indeed optimal according to the (weighted) mean density-based silhouette. Examine the optimal model in greater detail. Observe how the UCN model type explicitly includes a noise component.

```
(comp <- MEDseq_compare(mod1, mod2, mod3, criterion="dbs"))
opt <- comp$optimal
summary(opt)
```

```
## ---------------------------------------------------------------------
## Comparison of Mixtures of Exponential-Distance Models with Covariates
## Data: mvad.seq
## Ranking Criterion: DBS
## Optimal Only: FALSE
## ---------------------------------------------------------------------
##
## rank MEDNames modelNames G df iters bic icl aic dbs
## 1 mod1 UCN 10 684 10 -86876.197 -86887.052 -83752.045 0.474
## 2 mod2 CUN 9 647 49 -89379.589 -89388.574 -86424.433 0.42
## 3 mod3 CC 11 852 5 -84801.298 -84816.481 -80909.81 0.238
## asw loglik gating algo
## 0.359 -41192.022 ~fmpr + gcse5eq + livboth EM
## 0.37 -42565.217 None EM
## 0.329 -39602.905 ~male + catholic + funemp + gcse5eq + fmpr + livboth EM
## weights noise noise.gate equalPro
## TRUE TRUE TRUE
## TRUE TRUE FALSE
## TRUE FALSE
## ------------------------------------------------------
## Mixture of Exponential-Distance Models with Covariates
## Data: mvad.seq
## ------------------------------------------------------
##
## MEDseq (UCN), with 10 components
## Gating Network Covariates: ~fmpr + gcse5eq + livboth
## Noise Component: TRUE
## Noise Component Gating: TRUE
##
## log.likelihood N P V df iters DBS ASW BIC Algo
## -41192.02 712 71 6 684 10 0.47 0.36 -86876.2 EM
##
## Clustering table:
## 0 1 2 3 4 5 6 7 8 9
## 16 79 39 46 138 155 65 30 57 87
```

Examine the estimated gating network coefficients. Note that standard errors can be computed by calling `MEDseq_stderr`

on the `opt`

object, to better inform the interpretations of the covariate effects.

```
coef(opt$gating)
## (Intercept) fmpryes gcse5eqyes livbothyes
## Cluster2 -0.18964080 -0.6574700 1.3740424 -0.02973523
## Cluster3 -0.46305507 -0.5411090 -0.2235576 0.08432396
## Cluster4 0.04433461 0.2864898 1.2954436 -0.30215444
## Cluster5 0.48175311 -0.8935825 -0.2534328 -0.21066807
## Cluster6 -0.15643676 -0.2713519 0.1693219 -0.07445400
## Cluster7 -2.37938466 0.6215334 2.0301946 1.43157911
## Cluster8 -3.21496893 0.2758460 3.3367901 1.12349106
## Cluster9 -1.76413515 0.7124812 3.8529731 0.34858309
## Noise -1.95606029 0.3711763 1.7003713 -1.07290325
```

Visualise the clusters uncovered by the optimal model. Note that seriation is applied for visual clarity. The legend indicates which colours correspond to which state categories.

`plot(opt, type="clusters")`

Many other plotting options exist, some of which are adapted from the **TraMineR** package. Use the following code to examine the central sequence parameters. Note that the central sequence of the noise component is not shown as it doesn’t contribute to the likelihood.

`plot(opt, type="mean")`

Use the following code to see the observation-specific (weighted) density-based silhouette values (coloured by cluster). The (weighted) mean within each cluster is also shown. Note that the low average for the noise component is as expected; we do not expect this cluster to be internally coherent, rather it acts as a filter that allows the other clusters to be captured more clearly.

`plot(opt, type="dbsvals")`

Finally, we can quantify the type of observation characterising each cluster by computing the mean time spent in each state within each cluster. By specifying `MAP=TRUE`

here, we are computing the mean time based on the hard MAP partition rather than the soft probabilistic assignments. By specifying `norm=TRUE`

(which is the default), the mean times are normalised to sum to the sequence length within each cluster. The size of each cluster in terms of the number of observations assigned to it is also reported.

```
MEDseq_meantime(opt, MAP=TRUE, norm=TRUE)
## Size EM FE HE JL SC TR
## Cluster1 79 1.7974684 0.000000 47.721519 2.3037975 0.5569620 18.6202532
## Cluster2 39 2.7179487 2.769231 37.435897 2.6923077 24.0000000 1.3846154
## Cluster3 46 4.0869565 0.000000 9.282609 44.5652174 2.8260870 10.2391304
## Cluster4 138 30.9782609 1.166667 33.644928 3.3188406 0.7318841 1.1594203
## Cluster5 155 2.9870968 0.000000 61.716129 3.6387097 0.4967742 2.1612903
## Cluster6 65 2.8153846 0.000000 28.230769 5.1076923 0.8923077 33.9538462
## Cluster7 30 33.3000000 7.366667 6.666667 4.1666667 16.1333333 3.3666667
## Cluster8 57 27.1929825 37.789474 4.456140 0.7719298 0.7894737 0.0000000
## Cluster9 87 0.5057471 38.034483 4.390805 1.3563218 26.4137931 0.2988506
## Noise 16 17.7500000 1.687500 14.187500 14.7500000 2.3125000 20.3125000
```

As a second example, let’s consider data on \(N=2000\) 16 year-long family life state sequences built from the retrospective biographical survey carried out by the Swiss Household Panel (SHP) in 2002. Each of the \(v=8\) states are defined from a combination of five basic states; namely, living with parents (Parent), left home (Left), married (Marr), having children (Child), and Divorced. The data is available in the **MEDseq** package as `biofam`

. Type `?biofam`

for more information.

```
data(biofam, package="MEDseq")
biofam <- list(covariates = biofam[2L:9L],
sequences = biofam[10L:25L] + 1L)
biofam.cov <- biofam$covariates[,colSums(is.na(biofam$covariates)) == 0]
biofam.seq <- seqdef(biofam$sequences,
states = c("P", "L", "M", "L+M",
"C", "L+C", "L+M+C", "D"),
labels = c("Parent", "Left", "Married",
"Left+Marr", "Child", "Left+Child",
"Left+Marr+Child", "Divorced"))
```

While the data set contains weights, they are not appropriate for use; `biofam`

is merely a subsample of the original data so the weights are not properly adapted. Thus, we will fit a model without supplying the `weights`

argument. Secondly, the data set also contain some baseline covariates. As many of them contain missing values, let’s only consider the `birthwt`

variable, which gives the birth year of each subject.

In the previous example, the model by default assumed that covariates also influenced the mixing proportion of the noise component. We can override this by specifying `noise.gate=FALSE`

via `MEDseq_control`

. Thus, the noise component’s mixing proportion will be constant (though estimated) across all observed sequences and covariate patterns.

```
# The UUN model includes a noise component.
# Otherwise, the model has a precision parameter for each time point in each cluster.
bio <- MEDseq_fit(biofam.seq, G=10, modtype="UUN",
gating=~ birthyr, covars=biofam.cov,
control=MEDseq_control(noise.gate=FALSE))
```

Such a model was identified as optimal according to the weighted DBS criterion following the same steps as the analysis of the MVAD data in the Murphy et al. (2019) paper. Print the details of the model to the screen by typing `print(bio)`

:

```
## Call: MEDseq_fit(seqs = biofam.seq, G = 10, modtype = "UUN", gating = ~birthyr,
## covars = biofam.cov, control = MEDseq_control(noise.gate = FALSE))
##
## Best Model: UUN, with 10 components and no weights (incl. gating network covariates)
## DBS = 0.5 | ASW = 0.39 | BIC = -48455.12 | ICL = -48584.23 | AIC = -46741.24
## Gating: ~birthyr
```

As before, let’s look at the clusters uncovered by the model. This time, `seriate="both"`

means to order the clusters and the observations within clusters for visual clarity.

`plot(bio, type="clusters", seriate="both")`

Use the following code to examine the precision parameters. Note how we have a full \(16\times G\) matrix of precision parameters, one for each time point in each cluster. Typically, we would not supply the argument `log.scale=TRUE`

. However, in this case there are many quite large precision parameter values which skew the colour scale. Indeed, some are even infinite! Infinite precision under UU or UUN models implies that all values for that time point are identical within the given cluster.

`plot(bio, type="precision", log.scale=TRUE)`

This time, rather than showing the weighted mean DBS values, let’s look at observation-specific (unweighted) average silhouette-width values. Note that this relies instead on the MAP partition rather than the soft cluster assignment probabilities.

`plot(bio, type="aswvals")`

As stated above, some plot types are adapted from **TraMineR**. Let’s first look at a plot of the transversal Shannon entropies for the whole data set.

`seqHtplot(biofam.seq)`

Now let’s use the plot function from **MEDseq** to examine the transversal entropies within each cluster defined by the MAP partition. Here we can see for instance that subjects assigned to Cluster 9, corresponding to those individuals who left the parental home to marry relatively early and had a child on average just one year later, do indeed exhibit greater variability. Conversely, a postponement of the transition to adulthood is evident for subjects in Cluster 5.

`plot(bio, type="Ht")`

Other plot types adapted from **TraMineR** can be produced using `type="d"`

(state distribution plots), `type="f"`

(state frequency plots), `type="i"`

(selected sequence index plots), and `type="I"`

(whole set index plots). Each of these plots are shown on a per-cluster basis. Clustering uncertainties, the gating network, and model selection criteria can also be visualised.

Murphy, K., Murphy, T. B., Piccarreta, R., & Gormley I. C. (2019). Clustering longitudinal life-course sequences using mixtures of exponential-distance models. *To appear*. Pre-print available at arXiv:1908.07963.

McVicar, D. and Anyadike-Danes, M. (2002). Predicting successful and unsuccessful transitions from school to work by using sequence methods. *Journal of the Royal Statistical Society: Series A (Statistics in Society)*, 165(2): 317-334.

Müller, N. S., Studer, M., and Ritschard, G. (2007). Classification de parcours de vie à l’aide de l’optimal matching. In *XIVe Rencontre de la Société francophone de classification (SFC 2007)*, Paris, 5-7 septembre 2007_, pp. 157-160.