- Introduction
- Setup
- Roadmap: It all starts with “slabinterval”
- Eye plots and half-eye plots
- Histogram + interval plots
- CCDF bar plots
- Gradient plots
- Dotplots
- Custom plots
- Gradients of alpha, color, and fill
- CCDF Gradients
- Highlighting and other combinations
- Mashups with Correll and Gleicher-style gradients
- Densities filled according to intervals
- Using
color ramps for
`fill`

and`color`

aesthetics - Raindrop plots
- Creating ridge plots
- Varying side, scale, and justification within geoms
- Multiple slabs and intervals in composite plots

This vignette describes the slab+interval geoms and stats in
`ggdist`

. This is a flexible family of stats and geoms
designed to make plotting distributions (such as priors and posteriors
in Bayesian models, or even sampling distributions from other models)
straightforward, and support a range of useful plots, including
intervals, eye plots (densities + intervals), CCDF bar plots
(complementary cumulative distribution functions + intervals), gradient
plots, and histograms.

The following libraries are required to run this vignette:

```
library(dplyr)
library(tidyr)
library(distributional)
library(ggdist)
library(ggplot2)
library(cowplot)
library(patchwork)
theme_set(theme_ggdist())
```

`ggdist`

has a pantheon of geoms and stats that stem from
a common root: `geom_slabinterval()`

and
`stat_slabinterval()`

. These geoms consist of a “slab” (say,
a density or a CDF), one or more intervals, and a point summary. These
components may be computed in a number of different ways, and different
variants of the geom will or will not include all components.

The base `geom_slabinterval()`

uses a variety of custom
aesthetics to create the composite geometry:

Depending on whether you want a horizontal or vertical orientation,
you can provide `ymin`

and `ymax`

instead of
`xmin`

and `xmax`

. By default, some aesthetics
(e.g., `fill`

, `color`

, `size`

,
`alpha`

) set properties of multiple sub-geometries at once.
For example, the `color`

aesthetic by default sets both the
color of the point and the interval, but can also be overridden by
`point_color`

or `interval_color`

to set the color
of each sub-geometry separately.

`geom_slabinterval()`

is most useful when paired with
`stat_slabinterval()`

, which will automatically calculate
intervals, densities, and cumulative distribution functions, and maps
these onto endpoints of the interval sub-geometry or the
`thickness`

of the slab sub-geometry.

Using `geom_slabinterval()`

and
`stat_slabinterval()`

directly is not always advisable: they
are highly configurable on their own, but this configurability requires
remembering a number of combinations of options to use. For quick
plotting, ggdist contains a number of pre-configured, easier-to-remember
**shortcut stats and geoms** built on top of the
slabinterval:

**Shortcut geoms**, starting with`geom_`

, are meant to be used on already-summarized data:`geom_pointinterval()`

and`geom_interval()`

(for data summarized into intervals) and`geom_slab()`

(for data summarized into function values, like densities or cumulative distribution functions).**Shortcut stats**, starting with`stat_`

, which compute relevant summaries (densities, CDFs, points, and/or intervals) before forwarding the summaries to their geom. Some have geom counterparts (e.g.`stat_interval()`

corresponds to`geom_interval()`

, except the former applies to sample data and the latter to already-summarized data). Many of these stats do not currently have geom counterparts (e.g.`stat_ccdfinterval()`

), as they are primarily differentiated based on what kind of statistical summary they compute. If you’ve already computed a function (such as a density or CDF), you can just use`geom_slabinterval()`

directly. These stats can be used on two types of data, depending on what aesthetic mappings you provide:**Sample data**; e.g. draws from a data distribution, bootstrap distribution, Bayesian posterior distribution (or any other distribution, really). To use the stats on sample data, map sample values onto the`x`

or`y`

aesthetic.**Distribution objects and analytical distributions**. To use the stats on this type of data, you must use the`xdist`

, or`ydist`

aesthetics, which take distributional objects,`posterior::rvar()`

objects, or distribution names (e.g.`"norm"`

, which refers to the Normal distribution provided by the`dnorm/pnorm/qnorm`

functions).

All slabinterval geoms can be plotted horizontally or vertically.
Depending on how aesthetics are mapped, they will attempt to
automatically determine the orientation; if this does not produce the
correct result, the orientation can be overridden by setting
`orientation = "horizontal"`

or
`orientation = "vertical"`

.

We’ll start with one of the most common existing use cases for these kinds geoms: eye plots.

Eye plots combine densities (as violins) with intervals to give a more detailed picture of uncertainty than is available just by looking at intervals.

For these first few demos we’ll use these data:

```
set.seed(1234)
= tribble(
df ~group, ~subgroup, ~value,
"a", "h", rnorm(1000, mean = 5),
"b", "h", rnorm(1000, mean = 7, sd = 1.5),
"c", "h", rnorm(1000, mean = 8),
"c", "i", rnorm(1000, mean = 9),
"c", "j", rnorm(1000, mean = 7)
%>%
) unnest(value)
```

We can summarize it at the group level using an eye plot with
`stat_eye()`

(ignoring subgroups for now):

```
%>%
df ggplot(aes(y = group, x = value)) +
stat_eye() +
ggtitle("stat_eye()")
```

Users of older versions of `tidybayes`

(which used to
contain the `ggdist`

geoms) might have used
`geom_eye()`

, which is the older spelling of
`stat_eye()`

. Due to the name standardization in version 2 of
`tidybayes`

(see the description above),
`stat_eye()`

is now the preferred spelling.
`geom_eye()`

will continue to work for now, but is deprecated
and may throw a warning in future versions.

We can also use `stat_halfeye()`

instead to get densities
instead of violins:

```
%>%
df ggplot(aes(y = group, x = value)) +
stat_halfeye() +
ggtitle("stat_halfeye()")
```

Or use the `side`

parameter to more finely control where
the slab (in this case, the density) is drawn:

```
= df %>%
p ggplot(aes(x = group, y = value)) +
panel_border()
plot_grid(ncol = 3, align = "hv",
+ stat_eye(side = "left") + labs(title = "stat_eye()", subtitle = "side = 'left'"),
p + stat_eye(side = "both") + labs(subtitle = "side = 'both'"),
p + stat_eye(side = "right") + labs(subtitle = "side = 'right'")
p )
```

Note how the above chart was drawn vertically instead of
horizontally: all slabinterval geoms automatically detect their
orientation based on the input data. For example, if you use a factor on
one axis (say the `x`

axis below), the geom will be drawn
along the other axis:

```
%>%
df ggplot(aes(x = group, y = value)) +
stat_halfeye() +
ggtitle("stat_halfeye()")
```

If automatic detection of the desired axis fails, you can specify it
manually; e.g. with `stat_halfeye(orientation = 'vertical')`

or `stat_halfeye(orientation = 'horizontal')`

.

The `side`

parameter works for horizontal geoms as well.
`"top"`

and `"right"`

are considered synonyms, as
are `"bottom"`

and `"left"`

; either form works
with both horizontal and vertical versions of the geoms:

```
= df %>%
p ggplot(aes(x = value, y = group)) +
panel_border()
plot_grid(ncol = 3, align = "hv",
# side = "left" would give the same result
+ stat_eye(side = "left") + ggtitle("stat_eye()") + labs(subtitle = "side = 'bottom'"),
p + stat_eye(side = "both") + labs(subtitle = "side = 'both'"),
p # side = "right" would give the same result
+ stat_eye(side = "right") + labs(subtitle = "side = 'top'")
p )
```

Eye plots are also designed to support dodging through the standard
mechanism of `position = "dodge"`

. Unlike with geom_violin(),
densities in groups that are not dodged (here, ‘a’ and ‘b’) have the
same area and max width as those in groups that are dodged (‘c’):

```
%>%
df ggplot(aes(x = group, y = value, fill = subgroup)) +
stat_eye(position = "dodge") +
ggtitle("stat_eye(position = 'dodge')")
```

Dodging works whether geoms are horizontal or vertical.

The same set of (half-)eye plot stats designed for sample data
described above can be used on analytical distributions or distribution
vectors by using the `xdist`

/`ydist`

aesthetics
instead of `x`

/`y`

. These stats accept
specifications for distributions in one of two ways:

**Using distribution names as character vectors**: this
format uses aesthetics as follows:

`xdist`

,`ydist`

, or`dist`

: the name of the distribution, following R’s naming scheme. This is a string which should have`"p"`

,`"q"`

, and`"d"`

functions defined for it: e.g., “norm” is a valid distribution name because the`pnorm()`

,`qnorm()`

, and`dnorm()`

functions define the CDF, quantile function, and density function of the Normal distribution.`args`

or`arg1`

, …`arg9`

: arguments for the distribution. If you use`args`

, it should be a list column where each element is a list containing arguments for the distribution functions; alternatively, you can pass the arguments directly using`arg1`

, …`arg9`

.

**Using distribution vectors from the distributional
package or posterior::rvar() objects**: this format
uses aesthetics as follows:

`xdist`

,`ydist`

, or`dist`

: a distribution vector or`posterior::rvar()`

produced by functions such as`distributional::dist_normal()`

,`distributional::dist_beta()`

,`posterior::rvar_rng()`

, etc.

For example, here are a variety of normal distributions describing the same data from the previous example:

```
= tribble(
dist_df ~group, ~subgroup, ~mean, ~sd,
"a", "h", 5, 1,
"b", "h", 7, 1.5,
"c", "h", 8, 1,
"c", "i", 9, 1,
"c", "j", 7, 1
)
```

We can visualize these distributions directly using
`stat_eye()`

and the character vector input style to the
`ydist`

, `arg1`

, and `arg2`

aesthetics:

```
%>%
dist_df ggplot(aes(x = group, ydist = "norm", arg1 = mean, arg2 = sd, fill = subgroup)) +
stat_eye(position = "dodge") +
ggtitle("stat_eye(position = 'dodge')", 'aes(ydist = "norm", arg1 = mean, arg2 = sd)')
```

Or we can use the `distributional::dist_normal()`

function
to construct a vector of normal distributions. This syntax is often more
compact and expressive than the character-vector format above:

```
%>%
dist_df ggplot(aes(x = group, ydist = dist_normal(mean, sd), fill = subgroup)) +
stat_eye(position = "dodge") +
ggtitle("stat_eye(position = 'dodge')", "aes(ydist = dist_normal(mean, sd))")
```

This makes it easy to visualize a variety of distributions. E.g., here are some Beta distributions:

```
data.frame(alpha = seq(5, 100, length.out = 10)) %>%
ggplot(aes(y = alpha, xdist = dist_beta(alpha, 10))) +
stat_halfeye() +
labs(
title = "stat_halfeye()",
subtitle = "aes(xdist = dist_beta(alpha, 10), y = alpha)",
x = "Beta(alpha,10) distribution"
)
```

If you want to plot all of these on top of each other (instead of
stacked), you could turn off plotting of the interval to make the plot
easier to read using
`stat_halfeye(show_interval = FALSE, ...)`

. A shortcut for
`stat_halfeye(show_interval = FALSE, ...)`

is
`stat_slab()`

. We’ll also turn off the fill color with
`fill = NA`

to make the stacking easier to see, and use
outline `color`

to show the value of `alpha`

:

```
data.frame(alpha = seq(5, 100, length.out = 10)) %>%
ggplot(aes(xdist = dist_beta(alpha, 10), color = alpha)) +
stat_slab(fill = NA) +
coord_cartesian(expand = FALSE) +
scale_color_viridis_c() +
labs(
title = "stat_slab()",
subtitle = "aes(xdist = dist_beta(alpha, 10), color = alpha)",
x = "Beta(alpha,10) distribution",
y = NULL
)
```

The approach of using `arg1`

, … `arg9`

can work
well when comparing similar distributions, but is harder to use with
different distribution types. For example, if we wished to compare a
Student’s t distribution and a Normal distribution, the arguments may
not line up. This is a good case to use list columns and the
`args`

aesthetic. `ggdist`

includes an
implementation of the scaled and shifted Student’s t distribution
(`dstudent_t()`

, `pstudent_t()`

, etc) as it is
often needed for visualizing frequentist confidence distributions (see
`vignette("freq-uncertainty-vis")`

) and Bayesian priors:

```
tribble(
~ dist, ~ args,
"norm", list(0, 1),
"student_t", list(3, 0, 1)
%>%
) ggplot(aes(y = dist, xdist = dist, args = args)) +
stat_halfeye() +
ggtitle("stat_halfeye()", "aes(xdist = dist, args = args)")
```

A particularly good use of the `xdist`

/`ydist`

aesthetics is to visualize priors. For example, with `brms`

you can specify priors using the `brms::prior()`

function,
which creates data frames with a `"prior"`

column indicating
the name of the prior distribution as a string. E.g., one might set some
priors on the betas and the standard deviation in a model with something
like this:

```
# NB these priors are made up!
= c(
priors prior(normal(0,1), class = b),
prior(lognormal(0,1), class = sigma)
) priors
```

prior | class | coef | group | resp | dpar | nlpar | bound |
---|---|---|---|---|---|---|---|

normal(0, 1) | b | ||||||

lognormal(0, 1) | sigma |

The `parse_dist()`

function can make it easier to
visualize these: it takes in string specifications like those produced
by `brms`

— `"normal(0,1)"`

and
`"lognormal(0,1)"`

above — and translates them into
`.dist`

and `.args`

columns:

```
%>%
priors parse_dist(prior)
```

prior | class | coef | group | resp | dpar | nlpar | bound | .dist | .args |
---|---|---|---|---|---|---|---|---|---|

normal(0, 1) | b | norm | 0, 1 | ||||||

lognormal(0, 1) | sigma | lnorm | 0, 1 |

Notice that it also automatically translates some common distribution
names (e.g. “normal” and “lognormal”) into their equivalent R function
names (`"norm"`

and `"lnorm"`

). This makes it easy
to use them with the `xdist`

/`ydist`

aesthetics in
ggdist:

```
%>%
priors parse_dist(prior) %>%
ggplot(aes(y = class, xdist = .dist, args = .args)) +
stat_halfeye() +
labs(
title = "stat_halfeye()",
subtitle = "with brms::prior() and ggdist::parse_dist() to visualize priors",
x = NULL
)
```

The `stat_slabinterval()`

family also adjusts densities
appropriately when scale transformations are applied. For example, here
is a log-Normal distribution plotted on a log scale:

```
data.frame(dist = "lnorm", logmean = log(10), logsd = 2*log(10)) %>%
ggplot(aes(xdist = dist, arg1 = logmean, arg2 = logsd)) +
stat_halfeye() +
scale_x_log10(breaks = 10^seq(-5,7, by = 2))
```

As expected, a log-Normal density plotted on the log scale appears
Normal. The Jacobian for the scale transformation is applied to the
density so that the correct density is shown on the log scale.
Internally, ggdist attempts to do symbolic differentiation on scale
transformation functions (and if that fails, uses numerical
differentiation) to calculate the Jacobian so that the
`stat_slabinterval()`

family works generically across the
different scale transformations supported by ggplot.

`stat_[half]eye`

All of the stats in this section follow the naming scheme
`stat_[half]eye`

, where adding `half`

to the name
to yields half-eyes (density plots) instead of eyes (violins).

Like the remaining shortcut stats, these stats also follow these conventions:

- Map sample values to
`x`

or`y`

to use the stats on sample data. - Use the
`xdist`

,`ydist`

, and`args`

aesthetics for analytical distributions or distributions contained in vector objects, such as distributional or`posterior::rvar()`

objects.

In some cases you might prefer histograms to density plots.
`stat_histinterval()`

provides an alternative to
`stat_halfeye()`

that uses histograms instead of densities;
it is roughly equivalent to
`stat_slabinterval(slab_type = "histogram")`

:

```
= df %>%
p ggplot(aes(x = group, y = value)) +
panel_border()
= df %>%
ph ggplot(aes(y = group, x = value)) +
panel_border()
plot_grid(ncol = 2, align = "hv",
+ stat_histinterval() + labs(title = "stat_histinterval()", subtitle = "horizontal"),
p + stat_histinterval() + labs(subtitle = "vertical")
ph )
```

You can use the `slab_color`

aesthetic to show the outline
of the bars. By default the outlines are only drawn along the tops of
the bars, as typical tasks with histograms involve area estimation, so
the outlines between bars are not strictly necessary and may be
distracting. However, if you wish to include those outlines, you can set
`outline_bars = TRUE`

:

```
plot_grid(ncol = 2, align = "hv",
+ stat_histinterval(slab_color = "gray45", outline_bars = FALSE) +
ph labs(title = "stat_histinterval", subtitle = "outline_bars = FALSE (default)"),
+ stat_histinterval(slab_color = "gray45", outline_bars = TRUE) +
ph labs(subtitle = "outline_bars = TRUE")
)
```

While `stat_histinterval()`

will not produce histograms of
continuous analytical distributions, the
`stat_slabinterval()`

family will automatically detect
discrete distributions supplied on the `xdist`

and
`ydist`

aesthetics and plot them using stepped histograms
instead of densities. As with `stat_histinterval()`

, you can
choose whether or not to draw outlines between bars of the histogram
using `outline_bars = TRUE`

or `FALSE`

(the
default is `FALSE`

).

Here is an example of histograms of analytical distributions that
also shows a redundant encoding of the density by mapping the
`pdf`

computed variable onto `fill`

(in addition
to the default mapping onto `thickness`

):

```
tibble(
group = c("a","b","c","d","e"),
lambda = c(13,7,4,3,2)
%>%
) ggplot(aes(x = group)) +
stat_slab(aes(ydist = dist_poisson(lambda), fill = stat(pdf))) +
geom_line(aes(y = lambda, group = NA), size = 1) +
geom_point(aes(y = lambda), size = 2.5) +
labs(fill = "Pr(y)") +
ggtitle("stat_slab()", "aes(ydist = dist_poisson(lambda), fill = stat(pdf))")
```

This was inspired by an example from Isabella Ghement.

Another (perhaps sorely underused) technique for visualizing distributions is cumulative distribution functions (CDFs) and complementary CDFs (CCDFs). These can be more effective for some decision-making tasks than densities or intervals, and require fewer assumptions to create from sample data than density plots.

For all of the examples above, both on sample data and analytical
distributions, you can replace `[half]eye`

with
`[c]cdfinterval`

to get a stat that creates a CDF or CCDF bar
plot.

`stat_ccdfinterval()`

is roughly equivalent to
`stat_slabinterval(slab_type = "ccdf", justification = 0.5, side = "topleft", normalize = "none", expand = TRUE)`

`stat_[c]cdfinterval`

has the following basic
combinations:

```
= df %>%
p ggplot(aes(x = group, y = value)) +
panel_border()
= df %>%
ph ggplot(aes(y = group, x = value)) +
panel_border()
plot_grid(ncol = 2, align = "hv",
+ stat_ccdfinterval() + labs(title = "stat_ccdfinterval()", subtitle = "vertical"),
p + stat_ccdfinterval() + labs(subtitle = "horizontal"),
ph + stat_cdfinterval() + labs(title = "stat_cdfinterval()", subtitle = "vertical"),
p + stat_cdfinterval() + labs(subtitle = "horizontal")
ph )
```

The CCDF interval plots are probably more useful than the CDF
interval plots in most cases, as the bars typically grow up from the
baseline. For example, replacing `stat_eye()`

with
`stat_ccdfinterval()`

in our previous subgroup plot produces
CCDF bar plots:

```
%>%
df ggplot(aes(x = group, y = value, fill = subgroup, group = subgroup)) +
stat_ccdfinterval(position = "dodge") +
ggtitle("stat_ccdfinterval(position = 'dodge')")
```

The extents of the bars are determined automatically by range of the
data in the samples. However, for bar charts it is often good practice
to draw the bars from a meaningful reference point (this point is often
0). You can use `ggplot2::expand_limits()`

to ensure the bar
is drawn down to 0:

```
%>%
df ggplot(aes(x = group, y = value, fill = subgroup)) +
stat_ccdfinterval(position = "dodge") +
expand_limits(y = 0) +
# plus coord_cartesian so there is no space between bars and axis
coord_cartesian(expand = FALSE) +
ggtitle("stat_ccdfinterval(position = 'dodge')")
```

You can also adjust the position of the slab relative to the position
of the interval using the `justification`

parameter:

```
%>%
df ggplot(aes(x = group, y = value, fill = subgroup)) +
stat_ccdfinterval(position = "dodge", justification = 1) +
expand_limits(y = 0) +
coord_cartesian(expand = FALSE) +
ggtitle("stat_ccdfinterval(position = 'dodge', justification = 1)")
```

The `side`

parameter also works in the same way it does
with `stat_eye()`

. Here we’ll demonstrate it
horizontally:

```
= df %>%
p ggplot(aes(x = value, y = group)) +
expand_limits(x = 0) +
panel_border()
plot_grid(ncol = 3, align = "hv",
# side = "left" would give the same result
+ stat_ccdfinterval(side = "bottom") + ggtitle("stat_ccdfinterval()") + labs(subtitle = "side = 'bottom'"),
p + stat_ccdfinterval(side = "both") + labs(subtitle = "side = 'both'"),
p # side = "right" would give the same result
+ stat_ccdfinterval(side = "top") + labs(subtitle = "side = 'top'")
p )
```

You can also use `stat_ccdfinterval()`

to visualize
analytical distributions or distribution vectors, just as you can with
`stat_eye()`

and `stat_halfeye()`

.

By default, `stat_slabinterval()`

uses the quantiles at
`p = 0.001`

and `p = 0.999`

of the distributions
to determine their extent (unless the lower or upper limit of the
distribution’s support is finite, in which case that value is used). You
can change this setting using the `p_limits`

parameter, or
use `expand_limits()`

to ensure a particular value is shown,
as before:

```
%>%
dist_df ggplot(aes(x = group, ydist = dist_normal(mean, sd), fill = subgroup)) +
stat_ccdfinterval(position = "dodge") +
expand_limits(y = 0) +
ggtitle(
"stat_ccdfinterval(position = 'dodge')",
"aes(x = dist_normal(mean, sd)) + expand_limits(y = 0)"
+
) coord_cartesian(expand = FALSE)
```

All of the stats in this section follow the naming scheme
`stat_[c]cdfinterval`

:

- Add
`c`

to the name to get CCDFs instead of CDFs. - Use
`xdist`

/`ydist`

instead of`x`

/`y`

to use the stats on analytical distributions or distribution vectors instead of sample data. - It can be helpful to use
`expand_limits()`

to ensure meaningful reference points are included in the plot.

An alternative approach to mapping density onto the
`thickness`

aesthetic of the slab is to instead map it onto
its `alpha`

value (i.e., opacity). This is what the
`stat_gradientinterval`

family does (actually, it uses
`slab_alpha`

, a variant of the `alpha`

aesthetic,
described below).

It is roughly equivalent to
`stat_slabinterval(aes(slab_alpha = stat(f)), thickness = 1, justification = 0.5)`

.

For example, replacing `stat_eye()`

with
`stat_gradientinterval()`

produces gradient + interval
plots:

```
%>%
df ggplot(aes(x = group, y = value, fill = subgroup)) +
stat_gradientinterval(position = "dodge") +
labs(title = "stat_gradientinterval(position = 'dodge')")
```

`stat_gradientinterval()`

maps density onto the
`slab_alpha`

aesthetic, which is a variant of the ggplot
`alpha`

scale that specifically targets alpha (opacity)
values of the slab portion of `geom_slabinterval()`

. This
aesthetic has default ranges and limits that are a little different from
the base ggplot `alpha`

scale and which ensure that densities
of 0 are mapped onto opacities of 0. You can use
`scale_slab_alpha_continuous()`

to adjust this scale’s
settings.

Depending on your graphics device, gradients may be “choppy” looking.
You can fix this choppiness by setting
`fill_type = "gradient"`

, which uses a gradient feature
introduced in some graphics engines in R 4.1. If you use
`stat_gradientinterval()`

in R 4.1, you will receive a
message suggesting you may want to explicitly set
`fill_type = "gradient"`

to improve output quality. If you
are using R 4.2 or greater, you should not need to set
`fill_type = "gradient"`

as support for gradients can be
auto-detected in that version, but you will get a warning message if you
use `stat_gradientinterval()`

with a graphics engine that
does not support gradients.

```
%>%
df ggplot(aes(x = group, y = value, fill = subgroup)) +
stat_gradientinterval(position = "dodge", fill_type = "gradient") +
labs(title = "stat_gradientinterval(position = 'dodge', fill_type = 'gradient')")
```

As of this writing, in R version 4.1 or greater the graphics devices
that support gradients — i.e. device that support the
`grid::linearGradient()`

function — include
`pdf()`

, `svg()`

, and
`png(type = "cairo")`

. See here
for more about the changes to the R graphics engine.

As with other plot types, you can also use
`stat_gradientinterval()`

to visualize analytical
distributions or distribution vectors:

```
%>%
dist_df ggplot(aes(x = group, ydist = dist_normal(mean, sd), fill = subgroup)) +
stat_gradientinterval(position = "dodge", fill_type = "gradient") +
labs(
title = "stat_gradientinterval(position = 'dodge')",
subtitle = "aes(ydist = dist_normal(mean, sd), fill = subgroup)"
)
```

The encodings thus far are *continuous* probability encodings:
they map probabilities or probability densities onto aesthetics like
`x`

/`y`

position or `alpha`

transparency. An alternative is *discrete* or
*frequency-framing* uncertainty visualizations, such as
*dotplots* and *quantile dotplots*. *Dotplots*
represent distributions by showing each data point, and *quantile
dotplots* extend this idea to analytical distributions by showing
quantiles from the distribution as a number of discrete possible
outcomes.

For example, replacing `stat_halfeye()`

with
`stat_dots()`

produces dotplots. With so many dots here, the
outlines mask the fill, so it makes sense to map `subgroup`

to the outline `color`

of the dots as well:

```
%>%
df ggplot(aes(x = group, y = value, fill = subgroup, color = subgroup)) +
stat_dots(position = "dodgejust") +
labs(
title = "stat_dots()",
subtitle = "aes(fill = subgroup, color = subgroup))"
)
```

Unlike the base `ggplot2::geom_dotplot()`

geom,
`ggdist::geom_dots()`

automatically determines a bin width to
ensure that the dot stacks fit within the available space. You can set
the `binwidth`

parameter manually to override this.

The above plots are a bit hard to read due to the large number of
dots. Particularly when summarizing posterior distributions or
predictive distributions, which may have thousands of data points, it
can make sense to plot a smaller number of dots (say 20, 50 or 100) that
are *representative* of the full sample. One such approach is to
plot *quantiles*, thereby creating *quantile dotplots*,
which can help people make better decisions under uncertainty (Kay 2016, Fernandes 2018).

The `quantiles`

argument to `stat_dots`

constructs a quantile dotplot with the specified number of quantiles.
Here is one with 50 quantiles, so each dot represents approximately a 2%
(1/50) chance. We’ll turn off outline color too
(`color = NA`

):

```
%>%
df ggplot(aes(x = group, y = value, fill = subgroup)) +
stat_dots(position = "dodgejust", quantiles = 50, color = NA) +
labs(title = "stat_dots(quantiles = 50)")
```

For more on dotplots, see `vignette("dotsinterval")`

The `slabinterval`

family of stats and geoms is designed
to be very flexible. Most of the shortcut geoms above can be created
simply by setting particular combinations of options and aesthetic
mappings using the basic `geom_slabinterval()`

and
`stat_slabinterval()`

. Some useful combinations do not have
specific shortcut geoms currently, but can be created manually with only
a bit of additional effort.

Two aesthetics of particular use for creating custom geoms are
`slab_alpha`

, which changes the alpha transparency of the
slab portion of the geom, `slab_color`

, which changes its
outline color, and `fill`

, which changes its fill color. All
of these aesthetics can be mapped to variables along the length of the
geom (that is, the color does not have to be constant over the entire
geom), which allows you to create gradients or to highlight meaningful
regions of the data (amongst other things). You can also employ the
ggdist-specific `color_ramp`

and `fill_ramp`

aesthetics to create custom gradients with outline and fill colors, as
demonstrated later in this section.

**Note:** The examples of gradients in this section use
the (optional) experimental setting `fill_type = "gradient"`

.
If you do not have R greater than 4.1.0 or are not using a supported
graphics device, the output may be blank; in this case, omit this
option. Gradients can be produced without this option but they may not
look as nice.

By default, `stat_ccdfinterval()`

maps the output of the
evaluated function (in its case, the CCDF) onto the
`thickness`

aesthetic of the `slabinterval`

geom,
which determines how thick the slab is. This is the equivalent of
setting `aes(thickness = stat(f))`

. However, we could instead
create a CCDF gradient plot, a sort of mashup of a CCDF barplot and a
density gradient plot, by mapping `stat(f)`

onto the
`slab_alpha`

aesthetic instead, and setting
`thickness`

to a constant (1):

```
%>%
df ggplot(aes(x = group, y = value, fill = subgroup)) +
stat_ccdfinterval(aes(slab_alpha = stat(f)),
thickness = 1, position = "dodge", fill_type = "gradient"
+
) expand_limits(y = 0) +
# plus coord_cartesian so there is no space between bars and axis
coord_cartesian(expand = FALSE) +
ggtitle("stat_ccdfinterval(thickness = 1)", "aes(slab_alpha = stat(f))")
```

If this approach were applied to bins in a histogram, where each bin
had some uncertainty associated with its height, the result would be a
so-called *fuzzygram* (Haber and Wilkinson
1982).

The ability to map arbitrary variables onto fill or outline colors
within a slab allows you to easily highlight sub-regions of a plot.
Taking the earlier example of visualizing priors, we can add a mapping
to the `fill`

aesthetic to highlight a region of interest,
say ±1.5:

```
= tribble(
priors ~ dist, ~ args,
"norm", list(0, 1),
"student_t", list(3, 0, 1)
)
%>%
priors ggplot(aes(y = dist, xdist = dist, args = args)) +
stat_halfeye(aes(fill = stat(abs(x) < 1.5))) +
ggtitle("stat_halfeye()", "aes(fill = stat(abs(x) < 1.5)))") +
# we'll use a nicer palette than the default for highlighting:
scale_fill_manual(values = c("gray85", "skyblue"))
```

We could also combine these aesthetics arbitrarily. Here is a (probably not very useful) eye plot + gradient plot combination, with the portion of the distribution above 1 highlighted:

```
%>%
priors ggplot(aes(y = dist, xdist = dist, args = args)) +
stat_eye(aes(slab_alpha = stat(f), fill = stat(x > 1)), fill_type = "gradient") +
ggtitle(
"stat_eye(fill_type = 'gradient')",
"aes(slab_alpha = stat(f), fill = stat(x > 1)))"
+
) # we'll use a nicer palette than the default for highlighting:
scale_fill_manual(values = c("gray75", "skyblue"))
```

We can also take advantage of the fact that all slabinterval stats
also supply `cdf`

and `pdf`

aesthetics to create
charts that make use of both the CDF and the PDF in their aesthetic
mappings. For example, we could create Correll &
Gleicher-style gradient plots by fading the tails outside of the 95%
interval in proportion to \(|1 -
2F(x)|\) (where \(F(x)\) is the
CDF):

```
%>%
priors ggplot(aes(y = dist, xdist = dist, args = args)) +
stat_gradientinterval(aes(slab_alpha = stat(-pmax(abs(1 - 2*cdf), .95))),
fill_type = "gradient"
+
) scale_slab_alpha_continuous(guide = "none") +
ggtitle(
"stat_gradientinterval(fill_type = 'gradient')",
"aes(slab_alpha = stat(-pmax(abs(1 - 2*cdf), .95)))"
)
```

We could also do a mashup of faded-tail gradients with violin plots
by starting with an eye plot and then using the generated
`cdf`

aesthetic to fade the tails, producing plots like those
in Helske *et
al.*:

```
%>%
priors ggplot(aes(y = dist, xdist = dist, args = args)) +
stat_eye(aes(slab_alpha = stat(-pmax(abs(1 - 2*cdf), .95))), fill_type = "gradient") +
scale_slab_alpha_continuous(guide = "none") +
ggtitle(
"stat_eye(fill_type = 'gradient')",
"aes(slab_alpha = stat(-pmax(abs(1 - 2*cdf), .95)))"
)
```

A related idea is one from Tukey: rather
than visually emphasizing where a value is likely, emphasize where it is
*unlikely*. While Tukey used a visual representation showing both
pointwise and simultaneous intervals, for this example we will do
something a bit different, inverting the faded-tails function from
Correll & Gleicher to create bars that “block out” the regions of
low likelihood:

```
%>%
dist_df ggplot(aes(x = group, ydist = dist_normal(mean, sd), fill = subgroup)) +
stat_slab(
aes(
thickness = stat(pmax(0, abs(1 - 2*cdf) - .95)),
fill_ramp = stat(pmax(0, abs(1 - 2*cdf) - .95))
),side = "both", position = "dodge", fill_type = "gradient"
+
) labs(
title = 'stat_slab(side = "both")',
subtitle = paste0(
"aes(fill = subgroup,\n ",
"fill_ramp and thickness = stat(pmax(0, abs(1 - 2*cdf) - .95)))"
)+
) guides(fill_ramp = "none") +
coord_cartesian(expand = FALSE)
```

Thanks to a tweet from Jessica Hullman that inspired the idea.

Another common chart type involves filling in the interior of a halfeye plot according to some intervals. Here, we can use the fact that computed variables from the interval sub-geometry are made available to the slab sub-geometry and vice versa.

For example, within the slab sub-geometry, the `.width`

and `level`

computed variables correspond to the smallest
intervals that contain the `x`

value at that portion of the
slab. Thus, we can map `.width`

or `level`

onto
the slab fill:

```
%>%
df ggplot(aes(y = group, x = value)) +
stat_halfeye(aes(fill = stat(level))) +
# na.translate = FALSE drops the unnecessary NA from the legend, which covers
# slab values outside the intervals. An alternative would be to use
# na.value = ... to set the color for values outside the intervals.
scale_fill_brewer(na.translate = FALSE) +
labs(
title = "stat_halfeye()",
subtitle = "aes(fill = stat(level))",
fill = "interval"
)
```

(**Note:** in previous versions of ggdist, using
`cut_cdf_qi()`

was the recommended way to achieve this
affect. That function still exists for backwards compatibility, but
mapping `level`

or `.width`

is now the recommended
approach, as it generalizes to other interval types, such as
highest-density intervals — see later.)

To apply the color scale to all values outside the intervals, one
option is to split `stat_halfeye()`

into its constituent
parts (`stat_slab()`

and `stat_pointinterval()`

),
then include a “100%” interval in `.width`

:

```
%>%
df ggplot(aes(y = group, x = value)) +
stat_slab(aes(fill = stat(level)), .width = c(.66, .95, 1)) +
stat_pointinterval() +
scale_fill_brewer() +
labs(
title = "stat_slab()",
subtitle = "aes(fill = stat(level), .width = c(.66, .95, 1))",
fill = "interval"
)
```

If we change the interval type used, the resulting
`.width`

and `level`

computed variables change
correspondingly, allowing us to highlight other types of intervals
besides quantile intervals; for example, highest-density intervals:

```
= data.frame(dist = dist_beta(10, 2)) %>%
qi_plot ggplot(aes(xdist = dist, fill = stat(level))) +
stat_halfeye(point_interval = median_qi, .width = c(.5, .8, .95)) +
scale_fill_brewer(na.value = "gray95") +
labs(subtitle = "stat_halfeye(aes(fill = stat(level)), point_interval = median_qi)")
= data.frame(dist = dist_beta(10, 2)) %>%
hdi_plot ggplot(aes(xdist = dist, fill = stat(level))) +
stat_halfeye(point_interval = mode_hdci, .width = c(.5, .8, .95)) +
scale_fill_brewer(na.value = "gray95") +
labs(subtitle = "stat_halfeye(aes(fill = stat(level)), point_interval = mode_hdci)")
/
qi_plot hdi_plot
```

`fill`

and `color`

aesthetics`ggdist`

supplies `color_ramp`

(or
`colour_ramp`

) and `fill_ramp`

aesthetics which
can be used to vary (“ramp”) the outline or fill colors smoothly from a
base color (default `"white"`

) to whatever color the geometry
would otherwise have.

Taking the above example with interval-filled slabs, we could use the
`fill_ramp`

aesthetic instead of the `fill`

aesthetic to set the slab color based on the interval it is in. We could
then vary the base fill color separately from the interval based on
another column in the original data table, such as the
`subgroup`

column:

```
%>%
df ggplot(aes(y = group, x = value)) +
stat_halfeye(
aes(fill = subgroup, fill_ramp = stat(level)),
.width = c(.50, .80, .95),
# NOTE: we use position = "dodgejust" (a dodge that respects the
# justification of intervals relative to slabs) instead of
# position = "dodge" here because it ensures the topmost slab does
# not extend beyond the plot limits
position = "dodgejust",
+
) # a range from 1 down to 0.2 ensures the fill goes dark to light inside-out
# and doesn't get all the way down to white (0) on the lightest color
scale_fill_ramp_discrete(na.translate = FALSE) +
labs(
title = "stat_halfeye(position = 'dodgejust')",
subtitle = "aes(fill = subgroup, fill_ramp = stat(level))",
fill_ramp = "interval"
)
```

We could similarly use `stat_interval()`

with the
`color_ramp`

aesthetic to vary subgroup color separately from
the whiteness of the intervals. Here, `level`

is a variable
generated by all stats in the `stat_slabinterval()`

family
which contains the level of the generated intervals, as an ordered
factor.

```
%>%
dist_df ggplot(aes(x = group, ydist = dist_normal(mean, sd), color = subgroup)) +
stat_interval(aes(color_ramp = stat(level)), position = "dodge") +
labs(
title = "stat_interval()",
subtitle = "aes(color = subgroup, color_ramp = stat(level))"
)
```

See `help("scale_color_ramp")`

for more information on the
color ramp aesthetics/scales.

Barrowman and
Myers proposed an alternative to density-based eye plots (such as
created by `stat_eye()`

by default) called *raindrop
plots*. In these, the thickness of the slab is proportional to
`log(pdf)`

instead of `pdf`

, and is bounded within
the 95% interval. We can construct a function that uses the
`pdf`

and `.width`

computed variables to give a
thickness proportional to `log(pdf)`

within the 95% interval,
and use it to create raindrop plots.

Barrowman and Myers apply this technique with a 95% raindrop superimposed on a 99% raindrop, which we can replicate:

```
%>%
priors ggplot(aes(y = dist, xdist = dist, args = args)) +
# must also use normalize = "groups" because min(log(pdf)) will be different for each dist
stat_slab(
aes(thickness = stat(ifelse(.width <= 0.99, log(pdf), NA))),
normalize = "groups", fill = "gray85", .width = .99, side = "both"
+
) stat_eye(
aes(thickness = stat(ifelse(.width <= 0.95, log(pdf), NA))),
normalize = "groups"
+
) ggtitle(
'stat_eye(normalize = "groups")',
"with aes(thickness = stat(ifelse(.width <= 0.95, log(pdf), NA)))\nand aes(thickness = stat(ifelse(.width <= 0.99, log(pdf), NA)))"
)
```

When plotting densities (as in `stat_halfeye()`

,
`stat_slab()`

, etc) it can be useful to overplot many
densities simultaneously, an approach sometimes called *ridge
plots* (e.g. as in the ggridges package). This can be
done by setting `scale`

or `height`

to a value
greater than 1. Setting `height`

is often the best approach
as it will correctly adjust plot boundaries (unless you need to use
`position = "dodge"`

, in which case you should use
`scale`

and adjust plot boundaries manually).

```
set.seed(1234)
= data.frame(
ridges_df group = letters[7:1],
x = rnorm(700, mean = 1:7, sd = 2)
)
%>%
ridges_df ggplot(aes(y = group, x = x)) +
stat_slab(height = 2, color = "black") +
ggtitle("stat_slab(height = 2, color = 'black')")
```

Depending on if it makes sense for your data (for example, if the
scale is unbounded), you may also wish to adjust the `trim`

parameter, which by default restricts the density estimator to 0 outside
of the range of the data. Setting `trim`

to
`FALSE`

will ensure the densities smoothly go down to 0.
Combining this with `expand = TRUE`

will make each slab
expand itself to the limits of the `x`

axis.

We’ll use `trim`

and `expand`

along with a
combination of `fill`

and `fill_ramp`

to give each
group on the y axis a different color and to vary the fill along the
`x`

axis in a way that provides a “softer” form of region of
practical equivalence:

```
%>%
ridges_df ggplot(aes(
y = group, x = x,
fill = group, fill_ramp = stat(abs(x)),
color_ramp = stat(-dnorm(x, 0, 2))
+
)) stat_slab(
height = 2, color = "gray15",
expand = TRUE, trim = FALSE,
fill_type = "gradient",
show.legend = FALSE
+
) geom_vline(xintercept = 0, color = "gray85", linetype = "dashed") +
ggtitle(
'stat_slab(height = 2, color = "black", expand = TRUE, trim = FALSE)',
'aes(fill = group, fill_ramp = stat(abs(x)), color_ramp = stat(-dnorm(x, 0, 2)))'
+
) scale_fill_viridis_d()
```

We use a tighter ramp on `color`

compared to
`fill`

(via `-dnorm()`

instead of
`abs()`

) because we want the outlines to quickly ramp back to
black outside of 0 so that they have sufficient contrast against the
slabs when they overlap.

The `side`

, `scale`

, and
`justification`

parameters can also be varied within all
geoms in the `geom_slabinterval()`

family, allowing (for
example) different groups to hang above or below the interval:

```
%>%
dist_df filter(subgroup == "h") %>%
mutate(side = c("top", "both", "bottom")) %>%
ggplot(aes(y = group, xdist = dist_normal(mean, sd), side = side)) +
stat_dotsinterval(scale = 2/3) +
labs(
title = 'stat_dotsinterval(scale = 2/3)',
subtitle = 'aes(xdist = dist_normal(mean, sd), side = c("top","both","bottom"))'
+
) coord_cartesian()
```