added a new importUKAQ() function, which supersedes
importAURN(), importAQE(),
importWAQN(), importSAQN(),
importNI() and importLocal().
importUKAQ() brings a lot of new functionality to accessing
UK air quality data through {openair}.
importUKAQ() has all of the same arguments as the
functions it supersedes, as well as “source” to define the specific
network of interest. The “source” argument can either be of length 1 or
equal to the length of the “site” argument. This means that
importUKAQ() can import statistics from multiple different
networks at once.
importUKAQ() allows ratified = TRUE and
to_narrow = TRUE simultaneously. This will return a tibble
with two columns per observation - “value” containing the concentration
and “qc” containing TRUE/FALSE which indicates
whether the concentration is validated.
The AQE, WAQN, SAQN and NI networks now allow for
data_type = "daqi". At time of writing, only data from 2022
is present.
the site and pollutant arguments of
importUKAQ() are respected when data_type is
“daqi”, “annual” or “monthly”. The default behaviour to return all
available statistics has not changed. (#346)
the various arguments which augment import function outputs now
behave more consistently with one another. For example,
ratified now respects pollutant and only
returns the “_qc” columns for the pollutants of interest.
importAURN(), importAQE(),
importWAQN(), importSAQN(),
importNI() and importLocal() are still
exported by {openair}. These are all simply wrappers around
importUKAQ() with forced “source” arguments, and remain for
back-compatibility and convenience.
While importKCL() also imports uk air quality data,
it is not currently made available through importUKAQ().
Users should continue to import KCL data via importKCL()
for the time being.
importMeta() has gained two new “source” options to
assist with the new importUKAQ() function:
source = "ukaq" will return metadata for all of the
“UKAQ” networks.
source = "all" will return all available metadata
(including KCL and Europe).
new function runRegression() for extracting
‘dilution lines’ from air quality and other data. Online manual will be
updated with principles and examples.
calendarPlot() now automatically creates its own
labels if breaks are specified. For example,
c(0, 10, 20) will create the labels
c("0 - 10", "10 - 20"). labels can still be
used to override the default values. (#341)
Added the w.abbr.len argument to
calendarPlot() which controls the length of the weekday
abbreviation. This was requested to help people using written Chinese,
but will be more broadly useful (e.g., to use “Mon”, “Tue”, “Wed” in
place of “M”, “T”, “W”). (#101)
return tibble from timeAverage().
add option panel.gap to leave space between panels
in timeAverage day-hour plots. Set to 0 for previous
behaviour.
Move regression formula off main plot for
polarPlot() for clarity and label slope as ‘m’.
Tweak seasonal trend decomposition using STL to allow the
seasonal amplitude to vary more. Affects smoothTrend() and
TheilSen().
Added colours recommended by the UK Government Analysis Function
(https://analysisfunction.civilservice.gov.uk/policy-store/data-visualisation-colours-in-charts/)
to openColours().
The order of columns in importUKAQ() will remain
consistent (metadata, date, pollutants, meteo) regardless of whether
hc is TRUE or FALSE.
quickText() will now automatically capitalise “no”
to “NO”. (#343)
The year argument of importMeta() is
now respected when source = "kcl" and
"europe".
Several of the directional analysis plot family (e.g.,
polarFreq()) have been refactored to use
is.null() or is.na() over
missing(). While predominantly an internal change, this
should be make these functions easier to use inside of other functions
(e.g.,
function(data, breaks = NA) polarFreq(data, breaks = breaks))
will now run successfully).
For calendarPlot when annotated with ws or wd
arrows, use max ws/wd that corresponds to hour of maximum pollutant
concentration and not simple the max ws/wd for a day.
summaryPlot() no longer forces time zones to be GMT.
(#356)
add option meteo to importAURN() family
of functions. By default modelled wind speed, direction and ambient
temperature are returned if available, but not if
meteo = FALSE.
added a new column to modStats(), “P”, which
represents the P-value of the correlation as reported by
cor.test().
update processing of ADMS meteorological (.MOP) files to return stability and tidier data.
refined the output of pollutionRose() where the
ws2 and wd2 options are provided; instead of
the misleading N/E/S/W, the markers become 0, +90, +/-180, -90.
the timeAverage() progress bar is now powered by
{cli}/{purrr} and can be silenced using the
new progress argument.
the polarCluster() progress bar is now also powered
by {cli}/{purrr}.
colours corresponding to the UK daily air quality index (https://uk-air.defra.gov.uk/air-pollution/daqi) have
been added as options to openColours().
the {openair} object’s data property
returned by the trajLevel() function is now consistently
formatted regardless of statistic choice, and contains
relevant statistic-specific information (e.g., sigma for
"SQTBA").
fixed issue with modStats() such that “method” can
now be changed (e.g., to “spearman”).
fixed issue with aqStats() where output wasn’t being
properly split by pollutant/type.
fixed issue with conditionalQuantile() where the
plot would fail to be produced when “type” was not specified.
fixed issue with cutData() where “season” wouldn’t
respect system locale (e.g., would still show “(DJF)” on Italian
systems, instead of the correct “(gla)”). Note that the season name
itself (e.g., “Winter”) cannot be automatically converted.
fixed the theilSen() silent argument.
The message “taking bootstrap samples. please wait” is also now sent via
message() rather than print() and only appears
once per function call.
fixed issue where trajCluster() proportions would
overlap when clustering forward trajectories. Proportions should now
appear at the end of cluster paths, regardless of whether the trajectory
is back or forward.
fixed issue where not all {openair} plotting
functions would properly return an openair S3 object, and that not all
data objects were tibbles.
Fixed issue with timeAverage() where date formatting
caused problems, possibly due to latest version of R (4.3.0).
do not use native pipe yet - does not work with old versions of R
fix issue with polarDiff() where the resulting
openair object did not contain the plot
element.
add year as an option to importMeta.
This allows the user to select sites that were only open at some point
in the chosen year or duration of years.
make sure full daily gravimetric data are returned for PM10 and
PM2.5 if available when using importAURN family of
functions. These data will be returned as gr_pm2.5 and
gr_pm10 if data_type = "daily"
add alpha argument to all polar directional analysis
functions. This is mainly for use in openairmaps but may be
of general interest for specific use cases.
fix small bug in smoothTrend in returned fit data
when data is missing.
importLocal to access locally-managed automatic
monitoring datapollutionRose when single number of breaks
given (was ignored)import, import.2,
importAURNcsv and kernelExceedsigma to options for SQTBA trajectory analysis for
control over plume spread assumptions; set to 1.5 km (in one hour)timeAverage for multi-time period
averagestimeProp and simplify codeimportAURN as
data_type.importAURN
family as data_type.importMetacalendarPlot issue when there are gaps between
selected months e.g.month = c(1, 2, 12)calendarPlottimeAverage if DSTresolution in polarPlot — now
uses predictions at a coarser resolution that are interpolated. Will
also speed-up plottingtrajlevel), SQTBA — Simplified Quantitative Transport Bias
AnalysispolarPlot when two
pollutants supplied for different statisticspolarPlot. This regression approach determines a best fit
line when there is error in the ‘x’ and the ‘y’. The openair book will
be updated to cover this in more detail.importAURN.importAURN.windRose and
pollutionRose.TaylorDiagram for annotation of observed
data.timevariation when
difference = TRUEtrajCluster issue to do with
dplyrimportAURN, importSAQN,
importWAQN, importAQE and
importNI. New option data_type, which can be
“hourly” (default), “annual”, “monthly”, “daily” and “15min” (for
SO2). These new data sources should make it much easier to
work with long-term time series with many sites. See the
openair manual for more details.selectRunning.windRoseselectRunning. Now returns full data frame with
a new condition column.month not passed in
calendarPlotwindRose where whole period is calmpolarCluster to speed up clustering
through option pamonce = 3. This should not appreciably
affect results.aqStats due to
lubridate time zone issue.TaylorDiagram when group was present.plot.type to summaryPlot to
change line style; most useful for vertical lines in time series with
plot.type = "h"polarClusterpolarDiff to consider the difference
surface between two polar plots.polarCluster to consider clustering of
differences in polar plot surfaces.windRose and pass on option for
number of significant figures used to annotate plots
(dig.lab)percentileRose when
statistic = "cpf" and multiple pollutantstimeAverage when
type = "season" and avg.time = "season"week to openair default typestimeVariation when considering difference
plots with missing datareturnair_temp) to meteorological
variables returned from importAURN, importSAQN
and importWAQN (using WRF model).importAQE due to strange
dplyr join issuesstatistic = "Spearman" to polarPlot as
an option when considering two pollutants.method option to corPlot to allow
different correlation methods (“pearson”, “spearman” or “kendall”)importAURN, importSAQN,
importWAQN, importAQE.importNI to import data from Northern Ireland.ratified. These functions include importAURN,
importSAQN, importWAQN, importAQE
and importNIimportMetapercentileRose.importWAQN that would intermittently
fail; sometimes crashing R.date.format to TheilSen.calendarPlot slowness on MacOSpolarPlotstatistic = "nwr" in polarPlot
that implements the Non-parametric Wind Regression based on Henry et
al. (2009). The openair implementation is not identical but
should yield similar results.importAQE function to import data from Air Quality England
sites.importEurope to provide access to some the data
from the saqgetr package.TheilSen when no missing data and
deseason = TRUEtimeAverage when interval padding dates and
date is “Date” class and not “POSIXct”trajCluster, should be
n.cluster not n.clusterscutDatatimeAverage, used for avg.time = “season”.to_narrow to importAURN,
importSAQN, importKCL and
importWAQN to stack data into a tidy format. The data are
now returned as a ‘tibble’importSAQN and
importWAQN.TheilSen when conditioning and < 6
annual measurementspolarPlot axes.deseason = TRUE in smoothTrend and
TheilSen. This replaces simple linear interpolation.smoothTrend when ci = FALSE (no
smooth was fitted).importWAQN to access data from the Welsh air quality network.importMeta.importMeta.aqStats use default data.thresh = 0
rather than 75% to ensure summaries are calculatedtimeVariation when
statistic - “median”. Revision will result in narrower range.corPlot to plot lower and upper
triangles; add lower as an option.timeAverage when interval more than one time
unit e.g. “10 day”polarPlot(mydata, cols = "plasma")align to be used in aqStats
to determine how rolling means are calculated. Can take the values
“centre” (default), “left” and “right”.importAURNpolarAnnulusdplyr.lubridate in timeAverage to improve
speed / simplicityopenair
objectspolarPlot when
statistic = "cpf" when using tibblespolarCluster with exported data (date was
not correctly merged to produce single date column)mydata to a ‘tibble’ for easier
printing.npoints = NA in trajPlot to suppress
plotting of interval points.windRose when ws/wd have
different namestimeAverage for wind direction
(wd) when statistic = "data.cap"windRose(mydata, col = "cbPalette", breaks = 6).
Thanks to Jerry Martin.plot to TheilSen.
FALSE can be useful when analysing data to extract the
trend components and plot in other ways and when the
TheilSen plot is not required.silent to TheilSen to avoid
printing updates to trend fitting. By default it is
FALSE.timeVariation when more
than one pollutantselectByDate.timePlotcalendarPlot to span any time period. The
function can now straddle parts of two years or several years.col.arrow to calendarPlot to
control colour of the wind speed / direction annotation arrows.selectByDate due to changes in
lubridateimportSAQN when no dataimportAURN and
point users to importMetascatterPlot when
method = "level" due to NSEtidyr in place of reshape2plyr and
reshape2percentileRose for
method = "cpf" with multiple pollutantspolarCluster resolution to “normal” rather than
“fine” to speed up.trajLeveltimeAverage when
statistic = "sum" and all data in period was missing (would
return 0 rather than NA)conditionalEval
plots by using data where there are no missing data for all variables
used. This is more important of var.obs and
var.mod are supplied and hence additional variables are
considered relative to only obs and mod.calendarPlot to do with time
zoneswindRose/pollutionRose when two
conditioning variables were given (problem in bias correction)angle option to percentileRose to
allow wind direction averages for sectors >10 degrees.aqStats if only a few lines of datastatistic to equal “mean”, “median” or
“frequency” in scatterPlot, when
method = "level"scatterPlot when
method = "level" to use tensor interaction to allow for
better smoothing when x and y are on different scales.polarPlot
and suggest setting force.postive = FALSEmaps Suggests rather than DependswindRoseTheilSen and when
no trend information is givenbinData to easily summarise mean and 95%
confidence intervals for intervals of a variablebootMeanDF, used to calculate the bootstrap
uncertainty in the mean of a vector.importAURNpolarPlot to work with pairwise statistics to
compare two pollutants. The function can consider Pearson correlation
and slopes from ordinary linear regression, robust regression (using
MASS function rlm) and quantile regression
(requires the quantreg package to be installed). See open
access version of the paper.polarPlot plot resolution to
“fine”.windRose problem with some data due to missing
datamapdata package to SuggestsimportAURN and importKCL.polarPlot.y.relation is used when there is no grouping
in timePlot. To retain the behaviour of earlier versions
use relation = "free"type when used with
timePropwindRosetimePlotalpha to polarPlot to control
transparency of plotted surface. Mostly useful for overlaying polar
plots on leaflet maps (see openairmaps
package)grid.line option in windRose so
that users can control grid spacing, line type and line colourdownload.file can use libcurl for access to
https (used in importAURN)avg.time option to summaryPlot to
control the averaging times of the time series lines and
print.datacap to control whether the data capture % is
shown for each interval.selectByDate where a day number would not
workwindRose, polarPlot to
avoid ambiguous interpretation of wind directionkey.position option to timePlot to
control the location of the key.timeVariation when data for some types is
missing.trendLevel issue due to dplyrlubridate package in timeAveragesummaryPlot related to dplyr
use (would not plot missing data correctly)windRose mean and
statistics returned in data (thanks to Dr Ulrich Quass)importKCL when incomplete time series (would
drop site code and site name)pollutionRose due to issue with calmssmoothTrend where model uncertainties were
not returnedsummaryPlot where missing data would not be
shown correctly when date was not ordered in sequencewindRose when comparing two data
setsGoogleMapsPlot is deprecated and will be replaced with
a better function.corPlotimportAURNimportMeta for AURN - change in database
source formatpollutionRose plot warningmodStatstimeAverage where estimating the time
interval in input data could be unreliable due to low data
availabilitytimeAveragetype “yearseason” (or “seasonyear”). This will
split data by every year / season combination, making sure the seasons
are contiguous. For example, in winter in the northern hemisphere
December 2010 will be considered part of winter 2011, rather than winter
2010. Thanks to Ralf Weisse for the suggestion.importAURN and
importMeta when users are within an organisational network.
Problems likely due to move from http to https and SSL
Certificates.TheilSen bug when two types.dplyrconditionalEval to avoid plot
error.importAURNimportAURN meta data in help function.scatterPlot to have control over plot symbol fill
and colour (for symbols 21 to 25). Use cols and
fill to control.scatterPlot can now fit more than one linear equation
when there is a grouping variabletype such as
month, year etc.timeProp, remove
box.width optionwindRose bias
correction (thanks to Eric Christensen)statistic = "r" in
polarPlot for comparing polar plot correlation surfaces
between two pollutants using Gaussian kernel weighting.type = "daylight" when time zone not
UTC.cutDaylight as a separate function
(cutData works for everything)w.shift option to calendarPlot to
control the first day of the week and subsequent order (thanks to
Giovanni Bonafè)timeAverage when expanding time
seriesdplyr warnings in TheilSentype = "season" in TheilSen and
smoothTrendtrajClusterdplyr bugs where some functions would fail
with two typestrajClusterlinearRelation to use any arbitrary time
averaging period.timeVariation when
group = “season”NA factors in trajPlottrajPlot that sometimes failed to print map
when groupingtrajCluster and
option by.typecutDatatimeAveragelubridate for easier / faster
date-time manipulationstimeProp (lattice panel.barchart
is very slow)windRose (wd can be
NA and ws zero i.e. calm)timeVariation when
difference = TRUE for some factor levels (were in
alphabetical)trendLevel; make sure
strip is whitetimeVariation (vector.ws
did not work)TaylorDiagram more flexible when using two groups
and the second is date-basedGoogleMapsPlot when pollutant not givenGoogleMapsPlot;
write to temporary file insteadaqStatsTheilSen should always give trend in units/year (would
use xlab if supplied)cutData bug where quantile cuts are madescatterPlot so that
factors with no data still shownTheilSen should always give trend in units/year (would
use xlab if supplied)slope.text in TheilSen to allow
users to add their own text i.e. not the default “units/year”aqStatsimportAURNperiod = "months" in
summaryPlotmethod = "hexbin" in
scatterPlotairbaseStatswindRose when all calmscatterPlotwindflow to scatterPlot and
timePlot to allow wind flow plotssmoothTrendpollutionRose for option
normalise to show probability by wind sector (0 to 1).timeAverage now has an option type similar
to other functions. A common use would be to apply
timeAverage to a data frame with multiple sites where there
is a column representing site name e.g. type = "site".trajLevel
and trajPlot.trend to TheilSen to control
how the trend lines are drawn.calendarPlot when partial month
availablecalendarPlot, don’t need to cut data
firstnpoints option to trajPlot to control
time spacing of dots shown on back trajectoriesstatistic = "frequency
in timeAveragetimeProp due to point abovetimeVariation with
type = "season" when space in pollutant namesummaryPlot - useful for
shorter time seriesdplyr to speed up some of the
code e.g. timeAveragex.inc and y.inc if not supplied
by user in scatterPlottrajLevel frequency calculationimportMeta introduced since using
dplyrangle.scale to windRose to control
placement of radial scale (helps to avoid clash with wind rose
paddles)timePlot when avg.time given
(regression)TaylorDiagram to have group of
length two. This will show all group combinations but will only
differentiate them by colour/symbol according to the first grouping
variable.timeVariation can now take a ylim list to
control the y-limits on each individual plotmap.res to be “state” to
show the US States.importKCL when date was not at beginning of
the yeartimeVariation subsetsscatterPlot for surface
modellingimportKCL is file of full yearaqStats when multiple
pollutants selectedtimeVariation for y references
line(s)corPlottrajLevel (winter period not
properly calculated)timePlot,
scatterPlot, timeVariation and add to
smoothTrend together with full control of their properties.
Note - ref.x and ref.y must now be lists; see help file for
details.timeAverage for irregular time
intervalspercentileRose with stat = “cpf” and
non-default type (now uses single percentile based on all data, not each
panel)corPlot (thanks to James
Durant for the suggestion)corPlot when type = “default”pollutionRose when
annotate = FALSE.scatterPlot/trajPlot when user limits
suppliedsummaryPlot; some
users supplied “year” resulting in incorrect statisticspollutionRose when
statistic = “prop.mean” (was erroneously percentage)smoothTrend for more control
over names used for plottingcorPlottimeVariation to consider median + quantiles
through option ‘statistic’polarPlotimportKCL where dates were filled if two non
contiguous years were chosenpolarPlot when upper is
setsmoothTrend/TheilSen (was >=)polarPlot,
scatterPlot, polarAnnulus when limits within data
rangetimeVariation and polarAnnulus (allow any local time zone
to be used; was just GMT/BST before)smoothTrend and TheilSenpercentileRose by wind direction by
default.percentileRosetrajPlot bug when trajectory data was not at 3-hour
intervalssmoothTrendscatterPlot
surfacespolarPlot when statistic = “cpf”scatterPlot when x
and/or y are on a log scaletimeAverage when
requested averaging time is < original. Better handling when ‘site’
is presentpolarPlotpolarPlot to extract
more source information.polarPlot to down-weight bins
with few data points - alternative to min.binpolarPlottimePlot when pch supplied and group =
TRUE.windRose/pollutionRose to control extent of
radial limitstrajPlot and
trajLevel and make default lower resolution. Make default
pollutant ‘height’ (always present)calendarPlot, use first year
if not supplied, add option month to allow only selected month(s)timeAveragetrajPlotscatterPlotwindRose (thanks to Philippe
Barneoud from Environment Canada for pointing out the need and
solution)pollutionRose when comparing two
met datasets when ws bias is zerotrajLevelscatterPlotcorPlot - main did not worktimeVariation
(was variable clash). Allow more flexibility when group and type are
usedpolarPlot and
scatterPlot (method = “level”)percentileRose.pollutionRose documentation about comparing 2
data sets (first subtracted from second)timeVariation that showed extra NA level for
certain groups/typestrajLevelwindRose bug when wind direction name was not
wdimportAURN when pollutant = “all” was
specifiedwindRose bug where all data are missingtrajLevel for hexagonal
binning of trajectory frequenciespollutionRose scaling issue, which sometimes missed
the lower intervaltimeAverage data capture issue - was not always
setting data to NAcalendarPlot as other functions
(wrong month order in non-English locales)corPlot - see example in help
filepolarPlot when radial variable was
negative and smallpolarPlotpolarPlot and type is defaultwindRose when interval
does not existtimeVariationwindRose for empty panels and panel
labelling when data missingcalendarPlotpollutionRosepolarPlotcorPlotpolarPlots when there is
insufficient data to calculate a smooth surface.timeAverage to avoid variable
clash.trajLevelsummaryPlot: type = “density” broken in
recent versionstimePlotimportKCL - now consistent with
importAURNcalendarPlot - highlight
values above/below a certain threshold.timeAverage when ws was not available but wd
waswindRose when paddle = FALSEpolarPlot
grid linesimportKCL that was introduced in
0.5-21smoothTrend when type =
“site”windRose now gives mean ws in each panel rather than
counttimePlot for more control
over date format on axispollutionRose to control the width of
the segmentstimeVariation to control the
order of weekdays.importAURN to import new ws/wd from
pre-calculated WRF data at AURN sitestimeAverage by removing date.pad.timeAverage for wind
speed.NEW FUNCTION polarCluster for undertaking k-means clustering of bivariate polar plots
Remove any considerations of time zones in selectByDate. If start and end are supplied, whole days based on Date format are used to select. Now accepts start/end in the form “YYYY-mm-dd” as well as UK format e.g. dd/mm/YYYY.
polarPlot allowing variables other than
“ws” to be plotted with wind direction.polarPlot/TaylorDiagrampolarPlot concentrations unless upper is
suppliedpercentileRosetimeAverageTheilSen and smoothTrendtimeVariationtimeVariation to show
difference between two variables with bootstrap 95% CI in the meanscatterPlot to avoid
clash with x or y axis labels.corPlot, scatterPlot,
smoothTrend, linearRelation, percentileRose,
trajPlot, trajLevel,
timeVariation, TaylorDiagram, timePlot,
summaryPlot improved … handlingcorPlot added pollutant option,
and openair class outputpercentileRose deal with negative
dataTheilSen for all estimates
for consistency. May slightly affect some p estimates.calendarPlot, kernelExceed, MannKendall and
conditionalQuantile improved … handling minor update to GoogleMapsPlotwindRose and pollutionRose stat
related annotationpolarPlot, ploarFreq and polarAnnulus
improved … handlingimportMeta to import site meta data from
air pollution networkswindRose/pollutionRose: added
statistic option “abs.count”; improved scaling of segment widths;
improved … handlingtrajPlot,
trajLevel for importing and plotting pre-defined HYSPLIT
back trajectories. These functions are under active development and are
for testing purposes only!corPlot for correlation matricestimePlotwindRose/pollutionRosepercentileRosescatterPlot - not shown for some
methodsscatterPlot for binning data
with optional smoothing, plus other code clean-upstimePlot to allow reference
lines to be addedpollutionRose to show
contribution to counts and contribution to the mean. The latter is
useful for displaying those wind directions that make most contribution
to the overall mean. Panel mean is also now shown.importKCLtimeAverage can now expand data to shorter time periods
e.g. hourly to 15-minute. This makes it more flexible to combine data
sets with differing averaging times. For example, daily mean particle
data can be expanded to 1-hour means and combined with an hourly
meteorological data set.timeAveragetimeAverage (did not include
wind speed in calculations). For most data this will make very little
difference, but will be more important for low wind speeds and/or
variable wind directions.smoothTrendsmoothTrend for “month” or “year”
averagestimeAveragescatterPlot type = “wd” labels alignedpolarPlot, which can now
consider “mean”, “median”, “max” (maximum), “frequency”. “stdev”
(standard deviation) or “weighted.mean” in a similar way to
polarFreqsmoothTrend/MannKendall; particularly when there are
multiple sitestimePlot would fail with
percentiles)smoothTrend, MannKendall, timePlot and
scatterPlotimportKCL, added site
classification to the help file and ensured GMT is exported.smoothTrend and MannKendall
to allow flexible y-scales.percentileRose’ for flexible plotting of
percentiles by wind directionselectRunning for selecting run lengths of
a numeric variable above a certain threshold.polarPlot to maximise plotting
areawindRose
and percentileRose; new option grid.line to control radial
axes.summaryPlot and
timePlotwindRose and
pollutionRose on radial scalecalendarPlot main/quickText handling.calendarPlot first day of month error.summaryPlot site ordering when more than one
site.scatterPlot (plot.type, lwd, and
lty) making it possible to add points and/or linesAdded new function conditionalQuantile for model
evaluation purposes.Fixed `importAURN` to account for a change in web domain
address at AEA.